Product Summary

Universal Fit, Front Position, Vented Rotor Type

  • Engineered as high performance street and custom show replacements for C6 Corvettes and hot rods using Corvette suspension
  • Features Wilwood SLC56 4-piston black powder coated brake calipers
  • Kit includes SLC56 calipers, 12.8” diameter SRP series dimpled and slotted e-coat rotors, and the positive response, long wear, high fade resistance, and BP-10 compound Smart Pads
  • Bolts directly to the front spindle of any model C6 from 2005-2013, without the need for additional brackets or adapters
See more details

Key Specs

MFG. Part #140-17671-D
PositionFront
Wheel Bolt Pattern (in.)5x4.75 in.
Wheel Bolt Pattern (mm)5x120.65 mm
Rotor Diameter12.80 Inch
See more specs

Need To Know

Quick and Easy Returns

Return Policy

Wilwood 140-17671-D Details

SLC56 Front Replacement Caliper and Rotor Kit

SLC56 front caliper, pad, and rotor kits are engineered as high performance street and custom show replacements for Corvettes and hot rods using Corvette suspension. These kits combine the high-tech styling and superior performance of the SLC56 calipers, 12.8” diameter SRP series dimpled and slotted e-coat rotors, and the positive response, long wear, high fade resistance, and easy clean properties of the BP-10 compound Smart Pads. These kits bolt directly to the front spindle of any model C6 from 2005-2013, without the need for additional brackets or adapters.

Specs

Our rotors are machined and fully e-coated, just like the rotor hats. This is a protectant coating the prohibits surface rust from forming on the exposed surfaces. Once the parts are installed and being bedded in, the brake pad friction and caliper pressure will remove the coating at the spot the brake pads touch. This will expose the silver iron material underneath.

CARB Warning

Follow EPA, CARB, and state regulations for engine changes

Emissions warning: this part is for vehicle engine changes, not direct oem engine replacements. In California, engine changes are legal when done in compliance with California bureau of automotive repairs (bar) engine change policy. For assistance, call bar referee at: (800) 622-7733. And see https://bar.Ca.Gov/consumer/smog_check_program/engine_changes. All customers must comply with federal epa mobile source enforcement memorandum no. 1a (and addendum) and all applicable state regulations when conducting engine changes. Improper installation and/or use of this part in California may subject the installer and/or owner to a $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and laws of all states for use of this engine change part on makes or models of vehicles that render them noncompliant with applicable state and/or federal emission laws with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine

Wilwood 140-17671-D Specifications

KEY SPECS
MFG. Part #140-17671-D
BrandWilwood
PositionFront
Wheel Bolt Pattern (in.)5x4.75 in.
Wheel Bolt Pattern (mm)5x120.65 mm
Rotor Diameter12.80 Inch
Rotor TypeVented
Caliper PistonsFour
Caliper FinishPowder Coated
Parking Brake ProvisionNo
Minimum Recommended Wheel Diameter15 Inch
Rotor ShapeRound
Hardware IncludedYes
Rotor StyleDrilled & Slotted
Spindle TypeFactory Disc Spindle
Front Rotor IncludedYes
Front Rotor Diameter12.88 in./327.20mm
Front Caliper IncludedYes
Rear Caliper IncludedNo
Front Spindles IncludedNo
Master Cylinder IncludedNo
Brake Booster IncludedNo
Brake Hoses IncludedYes
Rear Rotor IncludedNo
ColorBlack
GENERAL
Sold in QuantityKit

Questions & Answers

Fitment

    Customer Impersonation Script