|
#91632513
Stainless Tie Rod/Drag Link Kit with 5/8 Heim Rod Ends, Custom Length
- Precut and tapped lengths of 7/8" O.D. tubing. All lengths measured eye to eye.
- Rod Ends have a carbon steel body and a hardened steel ball without a race (metal to metal contact).
- Complete with 5/8" rod ends and jam nuts
$281.99
/kit
Made to Order
$287.45
Save $5.46
This is a custom fabricated part. We estimate this item will ship on or before October 16th.
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Product Summary
Universal Fit, Complete Assembly Tie Rod Component
- Precut and tapped lengths of 7/8" O.D. tubing. All lengths measured eye to eye.
- Rod Ends have a carbon steel body and a hardened steel ball without a race (metal to metal contact).
- Complete with 5/8" rod ends and jam nuts
- Adjustable from 1/4" shorter to 1/2" longer
- Brushed stainless steel finish
Comes as a Kit
View Kit Components
Need To Know
Made to Order
This custom item will ship when completed
Need help?
855.313.9176Quick and Easy Returns
Return PolicySpeedway Motors 91632513 Details
Speedway Motors 91632513 Details
These unpolished stainless steel tie rod/drag link kits are pre-cut and tapped lengths of 7/8" O.D. tubing available in multiple lengths. Each kit comes complete with 5/8" heim joint rod ends and jam nuts.Tubing will be tapped with right-hand & left-hand threads for adjustability.
Specify desired length in comments section of shopping cart. No returns/exchange on custom length links.Select your length based on the center-to-center of the heim rod ends, which will also be the eye-to-eye distance between the steering arms (the acutal tube will be 3" shorter than length selected). At selected length, the link will be adjustable from 1/4" shorter to 1/2" longer.
Note: Please indicate and provide your required eye to eye length needed in the comments box located on the checkout page
Normally used with 49-54 Chevy style spindles and flat steel steering arms. Can be used with stock type Ford arms if drilled out to 5/8".
Note: Always use anti-seize to prevent galling the treads during final installation. Learn why running a tap or die over new threads is so important prior to assembly in our tech article,Installing New Hardware.
Item Details
w/ 5/8" Heims
Charts
Speedway Motors 91632513 Specifications
Speedway Motors 91632513 Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | 91632513 |
| Brand | Speedway Motors |
| Tie Rod Style | Straight |
| GENERAL | |
| Tie Rod Component | Complete Assembly |
| Thread Pitch | 5/8"-18 |
| Material Type | Stainless Steel |
| Finish | Brushed |
| Diameter | .875" |
| Overall Thickness | 0.156" |
| Grease Zerk Included | No |
| Sold in Quantity | Kit |
Ratings & Reviews
5
7 Reviews
Customers appreciate the quality and perfect fit of our tie rod bar and drag link, testimony to the superb manufacturing standards. The products' smooth edges and flawless threads get special praise, indicating superior material quality and safety. The custom-fit service allows users to get a perfectly tailored product for their specific cars, enhancing usability. Preference for our products over competitors is clear, with repeat purchases and satisfaction with the customizations available. Several reviews expressed wish for more aesthetic options like a polished finish.
Ratings & Reviews
5
7 Reviews
Customers appreciate the quality and perfect fit of our tie rod bar and drag link, testimony to the superb manufacturing standards. The products' smooth edges and flawless threads get special praise, indicating superior material quality and safety. The custom-fit service allows users to get a perfectly tailored product for their specific cars, enhancing usability. Preference for our products over competitors is clear, with repeat purchases and satisfaction with the customizations available. Several reviews expressed wish for more aesthetic options like a polished finish.
5
7 reviews
5
7
4
0
3
0
2
0
1
0
Filter by Ratings
Very nice Tie rod bar
5.0
4 years ago
Little blue car
Oregon
Verified
Tie rod bar Very nice smooth cut corners on threads no scratches in manufacturing. Very nice product.
Would Recommend
Drag Link
5.0
7 years ago
chuck
Minnesota
Verified
Arrived quickly and was perfect.
Would Recommend
I would buy this again.
5.0
8 years ago
Bill
Salisbury NC
Verified
Custom made to fit my car. Thanks for the prefect fit.
Would Recommend
Drag Link fit perfect.
5.0
8 years ago
Mwilla2
Olathe, Ks
Verified
This drag link and the tie rod I got from Speedway were both great quality and fit. Fast shipping also.
Would Recommend
I will always buy from Speedway
5.0
11 years ago
GaryB
San Diego
Verified
I special ordered this drag link on Wednesday and Saturday I had to make adjustments which increased the length. Monday morning I called Speedway and took a chance it was not to late. I received it the following Wednesday and it was the correct length. Thank you Speedway and your customer service for coming through at the last minute.
Would Recommend
Fit great ,perfect length.
5.0
14 years ago
mholmes
Salt Lake City
Verified
I wish I could have ordered one polished.
Would Recommend
Custon Drag Link
5.0
16 years ago
J. D.
Springfield MO
Speedster Custom Drag Link
Would Recommend
Showing 7 of 7 reviews
Questions & Answers
4 Questions • 5 Answers
Questions & Answers
4 Questions • 5 Answers
I need this to be 33" from center of the eye to center of the eye and still have a over all adjustment of a inch or less. Can this be made to that size?
by Motterville
• 8 years ago
2 answers
View Answers
I have a 45" steel tie rod now on my suicide front axle on a T-Bucket. The tie rod seems to have an excessive amount of flex in it and the front wheels do a lot of movement at hiway speed.It seems to me that this should not flex. I can actually pull on it in the middle of the bar and move the wheels in and out changing the toe by at least 1/4". How much flex would the stainless bar have if any? Thanks JD
by JD
• 10 years ago
1 answer
View Answer
What is the inside wall thickness of your tubes? 0.049, 0.065, 0.083, 0.095, 0.109 I understand that the end result is tapped for a 5/8 rod ends, but interested in making a custom panard bar. Thanks, Ed
by EEM2003
• 12 years ago
1 answer
View Answer
What size bolt is used with the heim joint 1/2 or 5/8. the drag link will be fitted to ana early chevy flat arm.
by Ryoung
• 13 years ago
1 answer
View Answer
4 of 4 questions shown