Speedway Gasser Finned Aluminum Single Quad Carburetor Air Scoops

#9105246

Speedway Gasser Finned Aluminum Single Quad Carburetor Air Scoops

Name: Speedway Gasser Finned Aluminum Single Quad Carburetor Air Scoops
Brand: Speedway Motors
SKU: 9105246
Rating: 4.8 (137 reviews)

137 Reviews

10 Questions

With a cast aluminum body and finned top, these air scoops give you that classic hot rod look
Measuring 13-1/2" long and 4-1/2" tall, they can fit under most hoods
The 5-1/8" neck fits most original and aftermarket 4-barrel carburetors, as well as some 2-barrel carbs

Finish:

Select a finish

Starting from

$99.99

/each

In Stock

Quantity

Need Help? Call to Order

Add to a list

Select a vehicle to verify Fitment

Select Vehicle

Product Summary

With a cast aluminum body and finned top, these air scoops give you that classic hot rod look
Measuring 13-1/2" long and 4-1/2" tall, they can fit under most hoods
The 5-1/8" neck fits most original and aftermarket 4-barrel carburetors, as well as some 2-barrel carbs
The included paper air filter element and 1/4" air cleaner stud complete the kit for an out-of-the-box installation
Available in three finishes of plain, polished, and black to fit any ride's style

See more details

Key Specs

MFG. Part #	Select Finish
Overall Length	Select Finish
Overall Width	9.66"
Overall Height	Select Finish
Hardware Included	Yes

See more specs

Need To Know

Need help?

855.313.9176

View the Help Center

Quick and Easy Returns

Return Policy

Details

For single quad
13-1/2" long x 4-1/2" tall with inlet screen and bezel
Fits carburetors with 5-1/8" neck
6-3/8" x 2-1/2" element and mounting hardware included

CARB Warning

For race/ off road use or for use on pre-1966 vehicles.

Emissions warning: this part only legal for sale or use in California for racing (competition) vehicles which may never be used, registered, or licensed for use upon a public highway, or if installed in vehicles model-year 1965 or older; motorcycles model-year 1977 or older; or off-highway recreational vehicles (such as off-road motorcycles and all-terrain vehicles) model-year 1996 and older. Any other use renders the vehicle tampered and not legal for use on California public highways (any public street or roadway, public dirt road, public park, or publicly maintained right of way open to the use of the public for vehicular travel). Violations subject to $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and the laws of all other states with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine.

CA Prop 65

CARB warning

Specifications

KEY SPECS
MFG. Part #	Select Finish to see
Brand	Speedway Motors
Overall Length	Select Finish to see
Overall Width	9.66"
Overall Height	Select Finish to see
Hardware Included	Yes
Housing Finish	Painted

GENERAL
Fuel Intake Type	Single Quad
Sold in Quantity	Select Finish to see
Notes	Fits carburetors with 5-1/8" neck
Inlet Diameter (Fraction)	5-1/8"

Ratings & Reviews

4.8

137 Reviews

Overall Assessment

Customers found this product to be great for their hot rod and vintage car builds, with many complimenting its old school, polished look once installed,. It was noted that the polished finish also adds a special shine to the engine compartment. The product can also fit and adapt to different car models, including Chevy, Ford, and T Model vehicles. Some participants advised improvements on the product finishing, suggesting an increase in care with the product's polishing before shipment. The product's quality, especially for its price, was frequently acknowledged. It's described as easy to install and customers found the hidden air filter under the hood to be a useful feature. The product was recommended for creating a less crowded and more appealing engine look, with customers saying it really made their engine compartment pop.

Write A Review

4.8

137 reviews

114

Most Liked Positive Review

5.0

Old time look

Used these for an old time look. Most dual quads are mounted on regular intakes,tunnel rams, or blowers. I'm going for an old nostalgic look. Zoomies are on the way to trim it all out.

Most Liked Negative Review

2.0

I would not buy this again

The scoop fits ok but you really have to crank down on it so that it doesn't move around. The polishing on it is terrible!!! I usually have great luck with Speedway stuff but this one was really disappointing!!!

Filter by Ratings

Sort Reviews

I would buy this again

5.0

2 months ago

LOBO

home

Verified

This item was installed on my 302 roller V8 built by Mr. Horsepower.

Would Recommend

Just the look we wanted!

5.0

3 months ago

Rory

North Idaho

Verified

Perfect appearance for our Rat! Everybody loves the RF vibe.

Would Recommend

Gasser

5.0

5 months ago

Ford f1

Jonesport Maine

Verified

Nice quality, fit like a glove.

Would Recommend

Love it

5.0

5 months ago

Rat Rod Relics

Saginaw MI

Verified

Worked great on our project

Would Recommend

The exact look we were searching for!!!

4.0

7 months ago

Simon

Phoenix, Az

Verified

Finishing our small block engine build and this scoop was the perfect look to top it off. Great design!!!

Would Recommend

It was fast shipping and looked good

5.0

8 months ago

Weezer

Hickman county TN

Verified

It fit good

Would Recommend

Yes

5.0

9 months ago

Rodman

Hamilton,wa.

Verified

This goes on my hot rod to give it that 50s look

Would Recommend

I would buy again

5.0

9 months ago

Leslie

Pueblo Colorado

Verified

Looks really good on top of engine. Nice finish overall.

Would Recommend

Very nice quality

5.0

9 months ago

Tank

So cal

Verified

Looks nice for the price...could've used a little more on the polishing...but looks great

Would Recommend

Adds a nice touch

5.0

10 months ago

Calroofer

Los Angeles

Verified

Worked perfect for what I needed and wanted

Would Recommend

Load More Reviews

Showing 10 of 137 reviews

Questions & Answers

10 Questions • 12 Answers

Sort Questions

Can you please give me the dimension from the very bottom of this air cleaner ( where it contacts the carburetor ) to the bottom of the scoop when installed. I want to make sure it will clear my distributor cap. Thank you.

by Jeff

• 2 years ago

1 answer

View Answer

RE:9105246 What is the minimum distance from the center of the carb to the rear of the scoop with the scoop all the way forward on the mounting slots? I want to know if I can make this work on my 1931 Ford Model A with a big block chevy engine.

by Gary

• 3 years ago

1 answer

View Answer

Will this part fit a Holley 750 double pumper carburetor??

by Chevie Dollaz

• 6 years ago

1 answer

View Answer

Is there a carb spacer that will work with this scoop? i've got a standard 2 inch aluminum spacer and just cant seem to get it to work, or maybe i'm just not seeing how to make it work. I need this scoop to clear a ford HEI distributor. Thanks, Randy

by Randy

• 7 years ago

1 answer

View Answer

Would this fit on a Motorcraft 2100?

by Noah

• 8 years ago

2 answers

View Answers

Is this scoop clear coated

by Tom

• 9 years ago

1 answer

View Answer

Will this scoop work with a Holley 600 cfm carb?

by Cowby Greg

• 10 years ago

1 answer

View Answer

width of assembly Hey guys. Can you tell me please what the width of this assembly is. Im trying to see if it will fit between my radiator support arms on my 29 roadster pick up that is channelled. Also is the total length equal from the centre point of the carb? Thanks Stuart

by cadatak

• 11 years ago

1 answer

View Answer

Will this fit on Edelbrock Carbs?

by RedDog

• 12 years ago

2 answers

View Answers

Do you sell replacement element for item #9105246?

by carguy27

• 13 years ago

1 answer

View Answer

10 of 10 questions shown