Speedway Flathead Ford Oil Pump, Standard Volume

Yes, I would buy this product again

worked perfectly, no complains what so ever about the product, it solved my problem.

I would buy again

New pump was cheaper than rebuilding old pump , only bad thing was new one from china, if I had known that I probably would not have bought it.

would recommend

1963 ford flathead

Good Value

Speedway has almost everything for less than most parts houses.

I would buy this part again if I needed another one.

I pumps oil, what else can I say?

good product

good product

Would buy again

Oil pump for 1952 Ford flathead Exact fit. Works as it should

Not very pleased

The shaft would bind while turning, metal shavings were present. I returned it for a refund and bought a melling. Customer service was A+.

This product needed some help.

As always, Speedway's product availability, order fulfillment, and delivery, were exceptional- exactly what I have come to expect. However, the product itself was in need of some help. Upon opening the package, this item looked fine. I turned the pump by hand, and it was not smooth. I added a small quantity of oil to it, and it locked up. Long story short, in the end, I needed to take the pump apart, and de-burr the cover, the one end of the drive gear, and both ends of the driven gear to obtain a fit and feel that I was convinced would be reliable. Took me about an hour and a half.

Must be inspected and/or reworked before installation.

When the pump arrived and was unpacked I noticed lots of sharp edges and burrs. Knowing what was on the outside probably defined what was on the inside, I disassembled the complete pump - everything. I found plenty of very sharp edges on every surface and I also found machining chips from the manufacturing process - not good for a new motor. Every component was inspected, deburred as required and inspected again. Gear end play clearance was good - between .002 & .003 without the gasket. I put everything back together with the confidence that the pump will do the job without putting contamination in my new motor. The price is right for the pump if you're prepared to spend some time making it right. No assuming it's good without checking.