Menu

Shop

Garage

Cart

Account

Product Summary

Chevy Small Block V8, Chassis Header Tube Type, Steel

  • These small block Chevy chassis headers offer the best of both worlds – full-length header performance in a design that hugs the engine tightly
  • Works with stock steering box and most Vega and Mustang conversions
  • AHC coating provides a long lasting bright finish as well as reduces underhood temperatures
  • 1-1/2" primary tubes with 3" collectors and reducers for 2.5" to 2.25"
  • Fits standard Chevy heads, Vortec heads and angle plug heads

Key Specs

MFG. Part #930C32H
BrandSpeedway Motors
Header Tube TypeChassis
FinishCeramic Coated
Material TypeSteel

Need To Know

This Product Will Ship Free

Shipping Policies & FAQs

Quick and Easy Returns

Return Policy

Details

These small block Chevy chassis headers offer the best of both worlds – full-length header performance in a design that hugs the engine tightly. These ceramic coated headers will fit many 1928-1948 Ford street rod applications.

  • Works with stock steering box and most Vega and Mustang conversions
  • Fits Standard Chevy and Vortec heads (not D-port, LT-1 or ZZ4)
  • Works with angle-plug heads
  • 1-1/2” primary pipes and 3” collectors

Includes bolts, gaskets, reducers and the supporting hardware.

Charts

Warranties

Warning: AHC coatings will burn and be damaged at exhaust temperatures over 1300° F. A lean fuel mixture can generate exhaust temperatures exceeding 1700-1900° F. If the coating is damaged due to a lean condition, the coating will not be warranted, but can be recoated for a fee.

Not legal for sale or use in California on pollution controlled motor vehicles.

CARB Warning

For race/ off road use or for use on pre-1966 vehicles.

Emissions warning: this part only legal for sale or use in California for racing (competition) vehicles which may never be used, registered, or licensed for use upon a public highway, or if installed in vehicles model-year 1965 or older; motorcycles model-year 1977 or older; or off-highway recreational vehicles (such as off-road motorcycles and all-terrain vehicles) model-year 1996 and older. Any other use renders the vehicle tampered and not legal for use on California public highways (any public street or roadway, public dirt road, public park, or publicly maintained right of way open to the use of the public for vehicular travel). Violations subject to $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and the laws of all other states with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine.

Specifications

KEY SPECS
MFG. Part #930C32H
BrandSpeedway Motors
Header Tube TypeChassis
FinishCeramic Coated
Material TypeSteel
GENERAL
Flange StyleStandard
Primary Tube Diameter1-1/2"
ColorSilver
Weld-UpNo
Exhaust Port ShapeRound
Overall Height17.5"
Tube Length23.30"
Collector Diameter3 Inch
Collector Length4.75"
Flange Thickness.31"
Port Height1.60"
Port Width1.51"
Header Dimension A3.50"
Header Dimension B17.50"
Header Dimension C23.30"
Drivers Side Dimension A3.50"
Drivers Side Dimension B17.50"
Drivers Side Dimension C23.25"
Passenger Side Dimension A3.50"
Passenger Side Dimension B17.50"
Passenger Side Dimension C23.25"
Hardware IncludedYes
Gasket(s) IncludedYes
Sold in QuantityPair
NotesIncludes a pair of reducers (2.50" to 2.25")
Collector Attachment Type3-bolt flange
Collector Reducers IncludedYes
Collector Reducer Exit Diameter2.25"