Replacement PTFE Washer for Stromberg 97 Banjo Fittings
Replacement PTFE Washer for Stromberg 97 Banjo Fittings
Speedway Motors

|

#91611079

Replacement PTFE Washer for Stromberg 97 Banjo Fittings

$1.49

/each

In Stock


Quantity

Need Help? Call to Order

Add to a list

Share

Select a vehicle to verify Fitment

Select Vehicle

Product Summary

Universal Fit, 0.621" Inside Diameter, PTFE

    See more details

    Key Specs

    MFG. Part #91611079
    BrandSpeedway Motors
    Inside Diameter0.621"
    Material TypePTFE
    See more specs

    Need To Know

    Need help?

    855.313.9176
    View the Help Center

    Quick and Easy Returns

    Return Policy

    Speedway Motors 91611079 Details

    This washer is a replacement for the larger of the two PTFE washers supplied with our Stromberg 97 style banjo fittings. It is sold individually and has a thickness of .06".

    This washer will replace the larger of the two PTFE washers for the following fittings:

    • 5/16" Single Carburetor Banjo Fuel Inlet Fittings - (91611067)
    • 3/8" Single Carburetor Banjo Fuel Inlet Fittings - (91611077)
    • 5/16" Dual Carburetor Banjo Fuel Inlet Fittings - (91611068)
    • 3/8" Dual Carburetor Banjo Fuel Inlet Fittings - (91611078)
    • Ford/Holley 94 Carburetor Banjo Fitting Spacers - (91611069)
     

    Speedway Motors 91611079 Specifications

    KEY SPECS
    MFG. Part #91611079
    BrandSpeedway Motors
    Inside Diameter0.621"
    Material TypePTFE
    GENERAL
    Sold in QuantityEach

    Ratings & Reviews

    4

    2 Reviews

    Overall Assessment

    Customers generally find the PTFE Washer for S to be a good product. They highlighted that it can effectively prevent gas leakage when used correctly. It has been pointed out that the problem is not with the washer's quality, but with the banjo housing not being correctly machined. After sanding the inside of the housings, customers faced no sealing issues. However, it was also suggested that copper seals could be superior. In all, the PTFE Washer was appreciated for its practicality and effectiveness.

    Write A Review

    4

    2 reviews

    5

    1

    4

    0

    3

    1

    2

    0

    1

    0

    Filter by Ratings

    https://www.speedwaymotors.com/Replacement-PTFE-Washer-for-S

    5.0

    8 years ago

    Badbowtie

    Canada

    Verified

    there is a trick to sealing these washers on the 97 carbs. the banjo bolt Must be able to spin freely inside the housing! if the bolt is binding with the gasket on the bolt it will appear really tight and will not seal! gas will leak. 100 % guaranteed . I fixed 4 housings from speedway with a pencil and some 320 sandpaper and sanded the inside of the housings until the bolt turned freely without the gasket. they then had no issues sealing with very little torque on the banjo bolt. its not the gaskets fault it is faulty banjo housing not machined properly. it is an easy fix. but has probly driven a few to drink chasing a fuel leak.

    It is good, but could be better.

    3.0

    8 years ago

    pgbsr

    West Creek, NJ

    Verified

    These are nylon seals for Stromberg 97 carbs fuel line banjo fittings. I think copper ones may be better.

    Would Recommend

    Showing 2 of 2 reviews

    Questions & Answers

    Be the first to ask a question.

    Customer Impersonation Script