This PSI Conversion harness connects a Gen 4 (58X) LS or Vortec engine with a drive-by-cable (mechanical) throttle body and an electronically controlled 4L60E (1996+) or 4L80E (1993+) automatic to a Holley Terminator X engine management system. It is built to your engine without the bulky sub-harness connections of a stock Holley harness, simplifying installation.
Application:
- Gen 4 (58X) LS and Vortec engines
- Drive-by-cable (mechanical) throttle body
- An electronically controlled 4L60E (1996+) or 4L80E (1993+) automatic
- EV6 injector connectors
Parts Included:
- Complete engine and transmission harness
- Instruction manual
Additional Items Required:
- Holley Terminator X MAX ECU (554-153). Terminator X MAX is required for 4L60E/4L80E transmission control
Standard Configuration:
- Injectors: EV6
- MAP sensor: Bosch (LS3 style)
- MAF sensor: none
- Cam sensor: Non-VVT
- Alternator: 4-pin
Works with 13-pin or 15-pin 4L60E transmissions. The harness is the same for both; only the computer programming differs.
Connections For:
- Fuse/relay box
- Fuel pump control (relay included)
- IAC and TPS (drive-by-cable)
- IAT, oil pressure, wideband O2, MAP and coolant temperature sensors
- Alternator control
- Crankshaft and camshaft position sensors
- EV6 fuel injectors and coil packs
- Transmission control
- Knock sensors
Connections You Will Need to Hook Up:
- Fuel pump (required)
- Switched ignition power (required)
- Constant power from the starter 12V stud
The PSI harness is a direct upgrade over the harness supplied in Holley Terminator X kits 550-903, 550-904, 550-905, 550-909, 550-910, 550-916 through 550-920 and 550-926 through 550-935. For 6L80E/6L90E applications, Holley Transmission Controller Kit 558-499 is required and ships separately from Holley.
Tuning:
The Terminator X features real-time fuel learning, high-impedance injector drivers, an integrated 1-bar MAP sensor and 4 programmable inputs/outputs for electric fans, boost control solenoids, progressive nitrous control and more. All Holley ECUs are set up with the Holley setup wizard on the 3.5in LCD screen or a laptop to create a self-learning base map; a custom tune from a professional tuner is recommended for built engines. A Holley ECU is a strong choice for race applications where tuning is changed frequently for different tracks or drivetrain changes.
Construction:
Built in-house in the USA with GM-spec SAE-1128 TXL (cross-linked polyethylene) high-temperature wire. Terminals and connectors meet or exceed OEM specifications from Delphi/Aptiv, Yazaki and Kostal. Every harness is 100% tested on Dynalab or Cirrus harness testing equipment.