|
#3257535
Edelbrock 7535 289-302 Small Block Ford Dual Quad Intake Manifold
- Edelbrock part #7535 RPM Air-Gap Dual-Quad is designed for 289-302-347 c.i.d. small-block Fords.
- This is a dual plane intake manifold which combines dual four-barrel excitement with a well-mannered street manifold.
- This intake is taller than the low-profile F-28 intake and offer performance improvements in the 1500-6500 rpm range.
$545.95
/each
Factory Shipped
Quantity
Need Help? Call to Order
Add to a list
Select an engine to verify Fitment
Select Engine
Product Summary
Carbureted Fuel System Type, Two Carburetor Quantity
- Edelbrock part #7535 RPM Air-Gap Dual-Quad is designed for 289-302-347 c.i.d. small-block Fords.
- This is a dual plane intake manifold which combines dual four-barrel excitement with a well-mannered street manifold.
- This intake is taller than the low-profile F-28 intake and offer performance improvements in the 1500-6500 rpm range.
- The large runners feature our unique Air-Gap design that separates the runners from the hot engine valley for a cooler, denser charge and more horsepower.
- Carb center to carb center is 6-7/16".
Key Specs
| MFG. Part # | 7535 |
| Intake Manifold Type | Dual Quad |
| Carburetor Flange Type | 4-Barrel Square Bore |
| RPM Range | 1,500-6,500 |
| Material Type | Aluminum |
Need To Know
Need help?
855.313.9176Quick and Easy Returns
Return PolicyEdelbrock 7535 Details
Edelbrock 7535 Details
Edelbrock RPM Air-Gap Dual Quad Intake Manifold for Ford 289-347 Small-Block V8
- Edelbrock part #7535 RPM Air-Gap Dual-Quad is designed for 289-302-347 c.i.d. small-block Fords.
- This is a dual plane intake manifold which combines dual four-barrel excitement with a well-mannered street manifold.
- This intake is taller than the low-profile F-28 intake and offer performance improvements in the 1500-6500 rpm range.
- The large runners feature our unique Air-Gap design that separates the runners from the hot engine valley for a cooler, denser charge and more horsepower.
- Carb center to carb center is 6-7/16".
Charts
Specs
- Carburetor Recommendations: Edelbrock Performer Series, 500 cfm
- Carb center spacing: 6-7/16"
- Manifold height @ front: 4.85"
- Manifold height @ rear: 5.70"
- Carb pad height: 5.28"
- Port exit dimensions: 1.05" x 1.90"
Guides & Documents
CARB Warning
For race/ off road use or for use on pre-1966 vehicles.
CARB Warning
For race/ off road use or for use on pre-1966 vehicles.
Edelbrock 7535 Specifications
Edelbrock 7535 Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | 7535 |
| Brand | Edelbrock |
| Intake Manifold Type | Dual Quad |
| Carburetor Flange Type | 4-Barrel Square Bore |
| RPM Range | 1,500-6,500 |
| Material Type | Aluminum |
| GENERAL | |
| Fuel System Type | Carbureted |
| Carburetor Quantity | Two |
| Finish | Natural |
| EGR | No |
| Intake Section Included | Complete |
| Gaskets Included | No |
| Overall Height | 5.28" |
| Port Height | 1.9" |
| Port Width | 1.05" |
| Bolt Hole Pattern | 5.160" x 5.625" |
| Sold in Quantity | Each |
| Notes | Designed specifically for AFB style carburetors only. |
| GTIN Code | 085347075355 |
Ratings & Reviews
Ratings & Reviews
Questions & Answers
Questions & Answers
4 Questions • 4 Answers
Do you have one that is similar but level, no carb pitch?
by indycoyote
• 8 years ago
1 answer
View Answer
Hi! Will this manifold accept holley carbs Mounted inline?
by Kirk
• 8 years ago
1 answer
View Answer
Level top or does it have a pitch to it? Thanks.
by Indycoyote
• 8 years ago
1 answer
View Answer
I would like to buy this intake manifold But i would like to know if i could use item # 9251000 complete kit with 9 super 7 carbs that would mean that i would use two of them but i want to know if putting two of them together will fit and how many primary carbs and secondary carbs i would need and if it would be better if i buy them individualy and the adaptor(#1352001) because i really like the look of 4x2 barrels it would be neat so your info is greatly appreciated thank you
by G450NE
• 13 years ago
1 answer
View Answer
4 of 4 questions shown
Fitment
Fitment
1964 AC Shelby Cobra
Ford 289
1968-1973 AC Shelby Cobra
Ford 289
1967 DeTomaso Mangusta
Ford 289
1963 Ford 300
Ford 289
1966-1968 Ford Bronco
Ford 289
1963-1967 Ford Club Wagon
Ford 289
1963-1968 Ford Country Sedan
Ford 289
1963-1968 Ford Country Squire
Ford 289
1964-1968 Ford Custom
Ford 289
1964-1968 Ford Custom 500
Ford 289
1963-1968 Ford Fairlane
Ford 289
1964-1968 Ford Falcon
Ford 289
1964-1965 Ford Falcon Sedan Delivery
Ford 289
1963 Ford Ford 300
Ford 289
1963-1967 Ford Galaxie
Ford 289
1963-1967 Ford Galaxie 500
Ford 289
1964-1969 Ford GT40
Ford 289
1965-1968 Ford LTD
Ford 289
1964-1968 Ford Mustang
Ford 289
1963-1968 Ford Ranch Wagon
Ford 289
1960-1961 Ford Ranchero
Ford 289
1965-1968 Ford Ranchero
Ford 289
1964 Ford Sprint
Ford 289
1968 Ford Torino
Ford 289
1964-1967 Mercury Caliente
Ford 289
1966-1967 Mercury Capri
Ford 289
1964-1968 Mercury Comet
Ford 289
1967 Mercury Commuter
Ford 289
1967-1968 Mercury Cougar
Ford 289
1963 Mercury Country Cruiser
Ford 289
1964-1968 Mercury Cyclone
Ford 289
1963 Mercury Meteor
Ford 289
1968 Mercury Montego
Ford 289
1964-1967 Mercury Villager
Ford 289
1966-1967 Mercury Voyager
Ford 289
1963-1968 Shelby Cobra
Ford 289

