Product Summary

Carbureted Fuel System Type, Two Carburetor Quantity

  • Edelbrock part #7535 RPM Air-Gap Dual-Quad is designed for 289-302-347 c.i.d. small-block Fords.
  • This is a dual plane intake manifold which combines dual four-barrel excitement with a well-mannered street manifold.
  • This intake is taller than the low-profile F-28 intake and offer performance improvements in the 1500-6500 rpm range.
  • The large runners feature our unique Air-Gap design that separates the runners from the hot engine valley for a cooler, denser charge and more horsepower.
  • Carb center to carb center is 6-7/16".
See more details

Key Specs

MFG. Part #7535
Intake Manifold TypeDual Quad
Carburetor Flange Type4-Barrel Square Bore
RPM Range1,500-6,500
Material TypeAluminum
See more specs

Need To Know

Quick and Easy Returns

Return Policy

Edelbrock 7535 Details

Edelbrock RPM Air-Gap Dual Quad Intake Manifold for Ford 289-347 Small-Block V8

  • Edelbrock part #7535 RPM Air-Gap Dual-Quad is designed for 289-302-347 c.i.d. small-block Fords.
  • This is a dual plane intake manifold which combines dual four-barrel excitement with a well-mannered street manifold.
  • This intake is taller than the low-profile F-28 intake and offer performance improvements in the 1500-6500 rpm range.
  • The large runners feature our unique Air-Gap design that separates the runners from the hot engine valley for a cooler, denser charge and more horsepower.
  • Carb center to carb center is 6-7/16".

Charts

Specs

  • Carburetor Recommendations: Edelbrock Performer Series, 500 cfm
  • Carb center spacing:  6-7/16"
  • Manifold height @ front:  4.85"
  • Manifold height @ rear:  5.70"
  • Carb pad height:  5.28"
  • Port exit dimensions:  1.05" x 1.90"

CARB Warning

For race/ off road use or for use on pre-1966 vehicles.

Emissions warning: this part only legal for sale or use in California for racing (competition) vehicles which may never be used, registered, or licensed for use upon a public highway, or if installed in vehicles model-year 1965 or older; motorcycles model-year 1977 or older; or off-highway recreational vehicles (such as off-road motorcycles and all-terrain vehicles) model-year 1996 and older. Any other use renders the vehicle tampered and not legal for use on California public highways (any public street or roadway, public dirt road, public park, or publicly maintained right of way open to the use of the public for vehicular travel). Violations subject to $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and the laws of all other states with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine.

Edelbrock 7535 Specifications

KEY SPECS
MFG. Part #7535
BrandEdelbrock
Intake Manifold TypeDual Quad
Carburetor Flange Type4-Barrel Square Bore
RPM Range1,500-6,500
Material TypeAluminum
GENERAL
Fuel System TypeCarbureted
Carburetor QuantityTwo
FinishNatural
EGRNo
Intake Section IncludedComplete
Gaskets IncludedNo
Overall Height5.28"
Port Height1.9"
Port Width1.05"
Bolt Hole Pattern5.160" x 5.625"
Sold in QuantityEach
NotesDesigned specifically for AFB style carburetors only.
GTIN Code085347075355

Questions & Answers

4 Questions • 4 Answers

Do you have one that is similar but level, no carb pitch?

by indycoyote

• 8 years ago

1 answer

Hi! Will this manifold accept holley carbs Mounted inline?

by Kirk

• 8 years ago

1 answer

Level top or does it have a pitch to it? Thanks.

by Indycoyote

• 8 years ago

1 answer

I would like to buy this intake manifold But i would like to know if i could use item # 9251000 complete kit with 9 super 7 carbs that would mean that i would use two of them but i want to know if putting two of them together will fit and how many primary carbs and secondary carbs i would need and if it would be better if i buy them individualy and the adaptor(#1352001) because i really like the look of 4x2 barrels it would be neat so your info is greatly appreciated thank you

by G450NE

• 13 years ago

1 answer

4 of 4 questions shown

Fitment

  • Ford 289

  • Ford 289

  • Ford 289

  • Ford 289

  • Ford 289

  • Ford 289

  • Ford 289

  • Ford 289

  • Ford 289

  • Ford 289

  • Ford 289

  • Ford 289

  • Ford 289

  • Ford 289

  • Ford 289

  • Ford 289

  • Ford 289

  • Ford 289

  • Ford 289

  • Ford 289

  • Ford 289

  • Ford 289

  • Ford 289

  • Ford 289

  • Ford 289

  • Ford 289

  • Ford 289

  • Ford 289

  • Ford 289

  • Ford 289

  • Ford 289

  • Ford 289

  • Ford 289

  • Ford 289

  • Ford 289

  • Ford 289

Customer Impersonation Script