Product Summary

Dual Plane Intake Manifold Type, Idle-5,500 RPM Range

  • Both accept late-model water neck, air-conditioning, alternator, H.E.I. and have rear water crossovers.
  • This intake manifold accepts exhaust-heated chokes. For 1987-95 stock aluminum heads use #2101.
  • Will not fit Chevrolet Bowtie or LT1 heads.
  • This manifold offers a polished finish for a brilliant shine and classic look.
See more details

Key Specs

MFG. Part #21041
Intake Manifold TypeDual Plane
Carburetor Flange TypeDual: Square and Spread Bore
RPM RangeIdle-5,500
Material TypeAluminum
See more specs

Need To Know

Quick and Easy Returns

Return Policy

Edelbrock 21041 Details

Edelbrock part #21041 Performer intake manifold is designed for street 262-400 c.i.d. Chevy V8's that have heads with canted center bolt holes, 1987-1995.

  • Both accept late-model water neck, air-conditioning, alternator, H.E.I. and have rear water crossovers.
  • This intake manifold accepts exhaust-heated chokes. For 1987-95 stock aluminum heads use #2101.
  • Will not fit Chevrolet Bowtie or LT1 heads.
  • This manifold offers a polished finish for a brilliant shine and classic look.

CARB Warning

Follow EPA, CARB, and state regulations for engine changes

Emissions warning: this part is for vehicle engine changes, not direct oem engine replacements. In California, engine changes are legal when done in compliance with California bureau of automotive repairs (bar) engine change policy. For assistance, call bar referee at: (800) 622-7733. And see https://bar.Ca.Gov/consumer/smog_check_program/engine_changes. All customers must comply with federal epa mobile source enforcement memorandum no. 1a (and addendum) and all applicable state regulations when conducting engine changes. Improper installation and/or use of this part in California may subject the installer and/or owner to a $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and laws of all states for use of this engine change part on makes or models of vehicles that render them noncompliant with applicable state and/or federal emission laws with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine

Edelbrock 21041 Specifications

KEY SPECS
MFG. Part #21041
BrandEdelbrock
Intake Manifold TypeDual Plane
Carburetor Flange TypeDual: Square and Spread Bore
RPM RangeIdle-5,500
Material TypeAluminum
GENERAL
Carburetor QuantityOne
FinishPolished
EGRNo
Intake Section IncludedComplete
Gaskets IncludedNo
Overall Height4.05"
Bolt Hole Pattern5.160" x 5.625"
Sold in QuantityEach
NotesAccepts late model choke, water neck, air conditioning, alternator, HEI, and has rear water crossover. Please see the charts and guides tab for a comparison of square bore vs spread bore.
GTIN Code085347210411

Questions & Answers

Fitment

  • Gen 1 L98 Small Block Chevy

  • Gen 1 L98 Small Block Chevy

  • Gen 1 L98 Small Block Chevy

  • Gen 1 L98 Small Block Chevy

  • Gen 1 L98 Small Block Chevy

  • Gen 1 L98 Small Block Chevy

  • Gen 1 L98 Small Block Chevy

  • Gen 1 L98 Small Block Chevy

  • Gen 1 L98 Small Block Chevy

Customer Impersonation Script