|
#6178564
Dot Braided Stainless Brake Hoses, GM/Ford, 7/16-20 Rear
- This brake line kit is DOT approved which allows it to be used on street driven vehicles
- Stainless steel braid over Teflon® hose allows the hose to maintain flexibility while being abrasion resistant
- 3/8"-24 IFF frame adapter fittings are included to allow for easy connection of 3/16" steel brake lines
$96.99
/set
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Product Summary
Universal Fit, Rear Position, -3 AN Brake Hose Size
- This brake line kit is DOT approved which allows it to be used on street driven vehicles
- Stainless steel braid over Teflon® hose allows the hose to maintain flexibility while being abrasion resistant
- 3/8"-24 IFF frame adapter fittings are included to allow for easy connection of 3/16" steel brake lines
- Frame tabs can be bolted or welded on and feature a spring clip for retaining the frame adapter
- 7/16"-20 thread banjo bolts and crush washers are included to create a leak free seal
Key Specs
| MFG. Part # | 6178564 |
| Position | Rear |
| Brake Hose Size | -3 AN |
| Brake Hose Length | 8" |
| Brake Hose Material | Stainless Steel Braided |
Need To Know
Need help?
855.313.9176Quick and Easy Returns
Return PolicySpeedway Motors 6178564 Details
Speedway Motors 6178564 Details
This line kit would be used to connect from "hard" lines on the rear axle to rear disc calipers when changing from drum to disc brakes. DOT approved brake line kits include two stainless steel -3 AN brake lines with the banjo fitting installed, banjo bolts and washers, 3/8"-24 IFF frame adapter fittings and frame tabs with clips. Includes -3 AN fittings and adapters to connect them to 3/16" brake line using a 3/8"-24 IFM flare nut.
- Stainless steel braid over Teflon® hose
- Reduces volumetric expansion of brake lines
- Reduces brake fade
- Less susceptible to debris than rubber line
- Used to connect from hard line on rear axle to rear calipers when changing from drum to disc brakes
Kit includes:
- (2) 8" stainless steel srake lines w/ 7/16" banjo on one end
- (2) 7/16" banjo bolts w/ crush washers
- (2) 3/8" x 24 IFF apapters to the hard lines
- (2) frame tabs & clips
Item Details
GM/Ford with 7/16"-20 caliper threadsSpeedway Motors 6178564 Specifications
Speedway Motors 6178564 Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | 6178564 |
| Brand | Speedway Motors |
| Position | Rear |
| Brake Hose Size | -3 AN |
| Brake Hose Length | 8" |
| Brake Hose Material | Stainless Steel Braided |
| GENERAL | |
| Hose OD | 0.25" |
| Brake Hose Fitting Size | -3 AN to 3/8"-24 IFF | 7/16" Banjo |
| Overall Length | 8" |
| Fitting End A | 3/8"-24 I.F. Female |
| Fitting End B | 7/16" Banjo |
| Sold in Quantity | Kit |
| Notes | DOT approved. Includes banjo bolts/washers, 3/8"-24 IFF frame adapter fittings, and frame tabs with clips. |
Ratings & Reviews
4.9
47 Reviews
Customers consistently affirm the product's high quality, affordability and practicality. Particular praises include the straightforward installation process, remarkable fitness, and superior quality. The product is commended for catering to a variety of specific needs and projects, such as rear disc brake system conversions and brake upgrades on different car models. However, a few customers express a desire for longer hoses, although this did not deter their overall satisfaction or recommendation of the product. Despite minor limitations, this product scores highly for its durability, presentation, and unmatched functionality.
Ratings & Reviews
4.9
47 Reviews
Customers consistently affirm the product's high quality, affordability and practicality. Particular praises include the straightforward installation process, remarkable fitness, and superior quality. The product is commended for catering to a variety of specific needs and projects, such as rear disc brake system conversions and brake upgrades on different car models. However, a few customers express a desire for longer hoses, although this did not deter their overall satisfaction or recommendation of the product. Despite minor limitations, this product scores highly for its durability, presentation, and unmatched functionality.
4.8
47 reviews
5
41
4
5
3
1
2
0
1
0
Most Liked Positive Review
5.0
Great upgrade for GM A-Body 9" swap
I used these braided lines on a '70 Chevelle that I was upgrading to a 9". These lines will bolt up directly to your factory rear brake lines. I ended up shortening the brake lines and reusing the fitting. No leaks at all and they are great quality. I wish they were a little longer, but they worked out fine.
Most Liked Negative Review
3.0
Great kit for brake upgrades
Used on a Mustang II front end and larger disk conversion. Worked great
Filter by Ratings
Would buy again
5.0
4 months ago
Matt
Virginia
Verified
Used these to tie in the rear disc brakes to the rest of my brake system. We're as described and apear to be good quality.
Would Recommend
Great replacement for OEM.
5.0
8 months ago
G2U
Lamar AR
Verified
Replaced brake lines on a "barn find" 1972 C10 Cheyanne Super. Perfect fit and replacement for OEM.
Would Recommend
Great product
5.0
10 months ago
Racer
Huntington Beach
Verified
Works great
Would Recommend
I would buy this product again
5.0
12 months ago
John
Lenoir NC
Verified
Worked the way I needed it to
Just what I needed
5.0
a year ago
Rpc
Zachary la
Verified
Worked great with new disk brakes
Would Recommend
yes I would buy this again
5.0
a year ago
gcarp2447
arkansas
Verified
Fit perfectly
Would Recommend
I would buy this product again
5.0
a year ago
Grasshopper
CR Iowa
Verified
Perfect fit. Great quality
Would Recommend
Used for rear disc brake to axle
5.0
a year ago
32coup3wdw
Washington
Verified
Use to be able to remove rear calipers to service pads/rotors etc...
Would Recommend
I would recommend
4.0
2 years ago
Shawn
Pa
Verified
Worked perfect . it'd be nice if they were a little bit longer.
Would Recommend
Yea I will buy again
5.0
2 years ago
Leo
Spring Glen, NY 12483
To replace the rear brakes
Would Recommend
Showing 10 of 47 reviews
Questions & Answers
1 Question • 1 Answer
Questions & Answers
1 Question • 1 Answer
Banjo Bold End is 7/16-20; Is the other end AN-3? The IFF info is confusing. Trying to replace/upgrade 1955 Chevy Pick up front brake hose which has 7/16-20, crush washer fitting at wheel cylinder to female AN-3 fitting which has clip that mounts to frame. This hose seems correct if the fitting with clips is female AN-3.
by Timeless
• 12 years ago
1 answer
View Answer
1 of 1 questions shown