18 Inch Braided SS -3AN Brake Line Kit, 7/16 Inch x20, 3/8-24 IFF

• (2) Straight -3AN 18" Braided Stainless Steel Brake Lines
• (2) -3AN Banjo Adapter Fittings - 7/16"
• (2) -3AN Male Adapter Fittings - 3/8"-24 IFF Straight
• (2) Steel 7/16 Inch x 20 Brake Banjo Bolts
• (2) Removable Brake Line Retaining Tabs w/Clips
• (5) 7/16" Crush Washers

Braided Stainless Steel Brake Lines

• Braided stainless covering over a Teflon inner liner
• Perfect for brake lines, clutch lines and gauge lines
• Straight -3AN fittings on both ends
• -3AN O.D. is .265
• Zinc Plated Steel Ends

Banjo Adapter Fittings

• Adapt a 7/16" banjo bolt to a AN style brake line
• Steel construction
• Zinc plated to resist corrosion
• Fitting End A: 7/16"
• Fitting End B: -3 AN

IFF Adapter Fittings

• Adapt 3/8"-24 Inverted Flare Female (IFF) to -3AN Male
• Commonly used in brake systems when converting a 45-degree flare (IF to a 37-degree flare (AN)
• Steel construction
• Zinc plated to resist corrosion
• Fitting End A: -3AN Male
• Fitting End B: 3/8"-24 I.F. Female
• Fitting Angle: Straight

Brake Banjo Bolts

• Designed to fit OEM brake lines and calipers
• Zinc-Plated to resist corrosion
• Leak-free performance
• Consistent fluid pressure delivered to brake caliper
• Steel construction
• 7/16 Inch x 20
• 2 crush washers included
• Under head length: 0.92"
• Thread length: .45"
• Overall length: 1.16"
• For use with banjo fittings

Note: To measure what size fitting you have, you will need to measure the outside diameter of the threads and check the tread pitch. To check for thread pitch you will need to count the number of threads you have in 1". It is easier if you have a thread pitch gauge which should be available at your local hardware/bolt supply store. This particular fitting measures 7/16" thread outside diameter and has 20 Threads Per Inch (TPI).

Removable Brake Line Retaining Tabs

• Bolt or rivet to your frame rather than welded
• 5/8" brake line hole with two 3/16" mounting holes
• Two tabs and two brake line retaining clips
• Steel construction
• Overall thickness: 0.11"
• Inside diameter: 0.63"

Crush Washers

• Crush washers come 5 in a package
• For 7/16" fittings
• Aluminum construction