Product Summary

  • Thick 12 Gauge Steel Mounting Plate is designed to be installed on the outside of the floor pan or transmission tunnel
  • Once a 1/2" dia. hole is drilled into the floor pan or tunnel for the anti-submarine belt and/or lap belt, the mounting plate is positioned so the plate’s included hardware can be tightened
  • Mounting plate has to be welded into place
  • Included 7/16" bolt and spacer allow the harness’ bolt in hardware to be raised off the floor or tunnel for proper belt positioning
  • Harness Mounting Plate needs to be installed as per your sanctioning body rules
See more details

Key Specs

MFG. Part #C4911
BrandCompetition Engineering
See more specs

Need To Know

Quick and Easy Returns

Return Policy

Competition Engineering C4911 Details

Mounting plate creates a strong, reinforced point that an anti-submarine belt and/or lap belt can bebolted to• Thick 12 Gauge Steel Mounting Plate is designed to be installed on the exterior side of the floor pan or transmission tunnel• A 1/2" dia. hole is drilled into the floor pan or tunnel for the anti-submarine belt and/or lap belt  • The included 7/16" bolt and spacer allow the harness’ bolt in hardware to be raised off the floor or tunnel for proper belt positioning

CARB Warning

For race/ off road use only

Emissions warning: this part only legal for sale or use in California for racing (competition) vehicles which may never be used, registered, or licensed for use upon a public highway. Any other use renders the vehicle tampered and not legal for use on California public highways (any public street or roadway, public dirt road, public park, or publicly maintained right of way open to the use of the public for vehicular travel). Violations subject to $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and the laws of all other states with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine.

Competition Engineering C4911 Specifications

KEY SPECS
MFG. Part #C4911
BrandCompetition Engineering

Questions & Answers

Customer Impersonation Script