Menu

Shop

Garage

Cart

Account

Product Summary

Universal Fit, Complete Assembly Tie Rod Component

  • These tie rod or drag link kits are pre-cut and tapped lengths of 7?8" O.D. tubing available multiple lengths
  • Kits come complete with 11/16" traditional 7° tie rod ends and jam nuts
  • The tubing will be tapped with right-hand & left-hand threads for adjustability
  • At selected length, the link will be adjustable from 1/2" shorter to 3/4" longer
  • Has a 11/16"-18 thread pitch and a 7-degree taper

Comes as a Kit

Key Specs

MFG. Part #91632505
BrandSpeedway Motors

Need To Know

Free Shipping on Orders Over $149

Shipping Policies & FAQs

Quick and Easy Returns

Return Policy

Speedway Motors 91632505 Details

These tie rod or drag link kits are pre-cut and tapped lengths of 7⁄8" O.D. tubing available multiple lengths. Kits come complete with 11/16" traditional 7° tie rod ends and jam nuts. Tubing will be tapped with right-hand & left-hand threads for adjustability.

Select your length based on the center-to-center of the tie rod ends, which will also be the eye-to-eye distance between the steering arms (the acutal tube will be 3" shorter than length selected). At selected length, the link will be adjustable from 1/2" shorter to 3/4" longer.

Note: Always use anti-seize to prevent galling the treads during final installation. Learn why running a tap or die over new threads is so important prior to assembly in our tech article,Installing New Hardware.

Item Details

w/ Plain tie rod ends

Charts

Speedway Motors 91632505 Specifications

KEY SPECS
MFG. Part #91632505
BrandSpeedway Motors
GENERAL
Tie Rod ComponentComplete Assembly
Tie Rod StyleStraight
Thread TypeRH Thread
Thread Pitch11/16"-18
Degree of Taper7 degree
Stud Length1.75"
Shank Length0.68"
Material TypeSteel
FinishChrome
Taper Small End0.58"
Taper Large End0.63"
Thread Pitch (2)11/16"-18 LH
Stud Diameter0.63"
Sold in QuantityKit
Notes1" from center of threaded shaft to the bottom of the taper. Includes boot, castle nut, and cotter pin.