Product Summary

383, Long Block Crate Engine Type, 445 ft./lbs. Torque

  • When it comes to cranking serious torque from the classic Small-Block, it's hard to beat the 383 stroker combination
  • Uses a long 3.800 inch stroke with 4.005 inch bores to generate exceptional low-end pulling power and surprising high-rpm horsepower
  • Features lightweight aluminum cylinder heads based on the proven Fast Burn design
  • Beehive-style valve springs enable great high-rpm performance and durability, allowing the SP383 to rev higher and build more horsepower
See more details

Key Specs

Crate Engine TypeLong Block
Engine Displacement383 cu. in.
Horsepower435 horsepower
Compression Ratio9.6:1
Torque445 ft./lbs.
See more specs

Need To Know

Truck Shipment

Truck shipments must be pre-paid with a credit card, certified check or money order

Quick and Easy Returns

Return Policy

Chevrolet Performance Parts 19432114 Details

  • When it comes to cranking serious torque from the classic Small-Block, it's hard to beat the 383 stroker combination
  • Uses a long 3.800 inch stroke with 4.005 inch bores to generate exceptional low-end pulling power and surprising high-rpm horsepower
  • Features lightweight aluminum cylinder heads based on the proven Fast Burn design
  • Beehive-style valve springs enable great high-rpm performance and durability, allowing the SP383 to rev higher and build more horsepower

Charts

CARB Warning

Follow EPA, CARB, and state regulations for engine changes

Emissions warning: this part is for vehicle engine changes, not direct oem engine replacements. In California, engine changes are legal when done in compliance with California bureau of automotive repairs (bar) engine change policy. For assistance, call bar referee at: (800) 622-7733. And see https://bar.Ca.Gov/consumer/smog_check_program/engine_changes. All customers must comply with federal epa mobile source enforcement memorandum no. 1a (and addendum) and all applicable state regulations when conducting engine changes. Improper installation and/or use of this part in California may subject the installer and/or owner to a $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and laws of all states for use of this engine change part on makes or models of vehicles that render them noncompliant with applicable state and/or federal emission laws with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine

Chevrolet Performance Parts 19432114 Specifications

KEY SPECS
MFG. Part #19432114
BrandChevrolet Performance Parts
Crate Engine TypeLong Block
Engine Displacement383 cu. in.
Horsepower435 horsepower
Compression Ratio9.6:1
Torque445 ft./lbs.
Camshaft TypeHydraulic Roller Tappet
Cylinder Head MaterialAluminum
Piston MaterialHypereutectic Aluminum
Crankshaft MaterialForged Steel
Combustion Chamber Volume62cc
Camshaft Duration (.050 in)222° intake / 230° exhaust
Camshaft Lift (in).509 intake / .528 exhaust
Bore x Stroke (in)4.000" x 3.480"
Carburetor IncludedNo
Intake Manifold IncludedYes
Distributor IncludedNo
Connecting Rod MaterialForged Steel
Valve Covers IncludedYes
Engine BalanceExternal
Cylinder Heads IncludedYes
Rear Main Seal Style1-piece
Throttle Body IncludedNo
Oil Pan IncludedYes
Timing Cover IncludedYes
Water Pump IncludedYes
Harmonic Balancer IncludedYes
Flexplate IncludedYes
Flywheel IncludedNo
Air Cleaner IncludedNo
Spark Plugs IncludedNo
Spark Plug Wires IncludedNo
Computer IncludedNo
Wiring Harness IncludedNo
Spark Plug StyleAngle
Recommended FuelPremium
GENERAL
Maximum RPM6,000
AssembledYes
Cylinder Head StyleAssembled
Intake Valves IncludedYes
Intake Valve Diameter2"
Exhaust Valves IncludedYes
Exhaust Valve Diameter1.55"
Camshaft IncludedYes
Cylinder HeadsFast Burn with LS-style Beehive Springs
Rocker ArmsAluminum roller
Rocker Arm Ratio1.5:1
BlockCast Iron, 4 bolt main
Sold in QuantityEach
Customer Impersonation Script