|
#35519432418
Chevrolet Performance 19432418 LS376/525 LS Crate Engine, 525HP
- The ASA camshaft is a hydraulic roller with .525-inch lift on both sides
- 226 degrees duration on the intake side
- 236 degrees on the exhaust side
Discontinued
This item is currently not available
Shop all Crate Engines
Product Summary
Long Block Crate Engine Type, 525 horsepower Horsepower
- The ASA camshaft is a hydraulic roller with .525-inch lift on both sides
- 226 degrees duration on the intake side
- 236 degrees on the exhaust side
- Chevrolet Performance complement the cam with higher-rate valve springs
Key Specs
| Crate Engine Type | Long Block |
| Compression Ratio | 10.7:1 |
| Engine Displacement | 376 cu. in. |
| Camshaft Type | Hydraulic Roller Tappet |
| Cylinder Head Material | Aluminum |
Need To Know
Truck Shipment
Truck shipments must be pre-paid with a credit card, certified check or money order
Need help?
855.313.9176Quick and Easy Returns
Return PolicyChevrolet Performance Parts 19432418 Details
Chevrolet Performance Parts 19432418 Details
Fuel-injected ferocity
With Chevrolet Performance's aggressive ASA camshaft installed in the LS3 6.2L engine, it comes alive with 525 uncompromising horsepower.
Take-no-prisoner performance
- The ASA camshaft is a hydraulic roller with .525-inch lift on both sides
- 226 degrees duration on the intake side
- 236 degrees on the exhaust side
- Chevrolet Performance complement the cam with higher-rate valve springs
Charts
Specifications (PDF)
Guides & Documents
CARB Warning
Follow EPA, CARB, and state regulations for engine changes
CARB Warning
Follow EPA, CARB, and state regulations for engine changes
Emissions warning: this part is for vehicle engine changes, not direct oem engine replacements. In California, engine changes are legal when done in compliance with California bureau of automotive repairs (bar) engine change policy. For assistance, call bar referee at: (800) 622-7733. And see https://bar.Ca.Gov/consumer/smog_check_program/engine_changes. All customers must comply with federal epa mobile source enforcement memorandum no. 1a (and addendum) and all applicable state regulations when conducting engine changes. Improper installation and/or use of this part in California may subject the installer and/or owner to a $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and laws of all states for use of this engine change part on makes or models of vehicles that render them noncompliant with applicable state and/or federal emission laws with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine
Chevrolet Performance Parts 19432418 Specifications
Chevrolet Performance Parts 19432418 Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | 19432418 |
| Brand | Chevrolet Performance Parts |
| Crate Engine Type | Long Block |
| Compression Ratio | 10.7:1 |
| Engine Displacement | 376 cu. in. |
| Camshaft Type | Hydraulic Roller Tappet |
| Cylinder Head Material | Aluminum |
| Piston Material | Hypereutectic Aluminum |
| Crankshaft Material | Nodular Iron |
| Carburetor Included | No |
| Intake Manifold Included | Yes |
| Distributor Included | No |
| Connecting Rod Material | Powdered Metal |
| Valve Covers Included | Yes |
| Engine Balance | Internal |
| Cylinder Heads Included | Yes |
| Rear Main Seal Style | 1-piece |
| Throttle Body Included | Yes |
| Timing Cover Included | Yes |
| Oil Pan Included | Yes |
| Water Pump Included | Yes |
| Harmonic Balancer Included | Yes |
| Flexplate Included | No |
| Flywheel Included | No |
| Air Cleaner Included | No |
| Spark Plugs Included | Yes |
| Spark Plug Wires Included | Yes |
| Computer Included | No |
| Wiring Harness Included | No |
| Recommended Fuel | Premium |
| Spark Plug Style | Stock |
| GENERAL | |
| Torque | 489 ft./lbs. |
| Horsepower | 525 horsepower |
| Maximum RPM | 6,600 |
| Combustion Chamber Volume | 68cc |
| Camshaft Duration (.050 in) | 226° intake / 236° exhaust |
| Camshaft Lift (in) | .525 intake / .525 exhaust |
| Bore x Stroke (in) | 4.060" x 3.620" |
| Warranty | 2 year / 50,000 mile |
| Assembled | Yes |
| Cylinder Head Style | Assembled |
| Intake Valves Included | Yes |
| Intake Valve Diameter | 2.165" |
| Exhaust Valves Included | Yes |
| Exhaust Valve Diameter | 1.59" |
| Camshaft Included | Yes |
| Cylinder Heads | Aluminum L92/LS3 style ports |
| Rocker Arms | Investment-cast, roller trunnion |
| Rocker Arm Ratio | 1.7:1 |
| Block | Cast-aluminum with six-bolt, cross-bolted main caps |
| Sold in Quantity | Each |
