BluePrint Engines BLS3769SCTK4L8 LS 376/4L80E, Terminator X, Nat.

 The BluePrint Engines GM LS Compatible 376ci is a masterclass in high-performance durability, engineered to deliver a staggering 700 horsepower and 640 lb-ft of torque with unwavering reliability. At the heart of this beast lies the Magnuson TVS 2650 Supercharger, providing instant, efficient boost and relentless power across the RPM range. The Holley Terminator X Max Gen IV ECU and harness system ensures precise engine management, while the advanced EFI system—complete with high-flow fuel injectors and rail—maintains optimal combustion under extreme conditions. Every supporting component, from the oil pan and coil packs to the spark plugs, wires, water pump, and harmonic balancer, is built to withstand the rigors of high-output operation. Paired with the bulletproof 4L80E automatic transmission, this setup offers smooth, torque-rich shifts that handle the power with ease. Finished with the Holley Natural Front pulley kit, this configuration is not only robust and performance-driven—it’s a statement of engineering excellence.

• GM LS 376 C.I. Pro Series Engine
• Natural Pulley Kit
• 4L80E Transmission
• Standard Edition Builder Series
• Holley Terminator X EFI

Block:

• BluePrint Engines High Strength Cast Iron Block
• Increased Deck Thickness and Strength Webbing
• Utilizes OEM LS3 Front and Rear Covers
• Improved Water Jacket Design
• Extended Cylinder Skirt
• 1-Piece Rear Main Seal
• Priority Main Oiling
• 4.0665" Bore
• 6-Bolt Main

Rotating Assembly:

• Forged Crankshaft
• 3.622" Stroke
• 6.125" Forged Connecting Rods w/ 150,000 PSI Bolts
• Forged Pistons
• Internally Balanced Front and Rear

Cylinder Heads:

• BluePrint Aluminum Cylinder Heads - PS8015
• 70cc Chamber
• 2.165" Intake / 1.590" Exhaust Valves
• 259cc Intake / 102cc Exhaust Runners

Cam Specs:

• Hydraulic Roller Cam
• .612 Intake / .585 Exhaust Lift
• 225 Intake / 238 Exhaust Duration
• @.050-113 Degree Lobe Separation

Holley Terminator X Max Specific Features and Benefits:

• Real Time Fuel Map Learning Simplifies Tuning by Dynamically Adjusting the Base Fuel Rate
• On Board Bosch LSU 4.9 Wideband Control, Enabling Accurate AFR Readings and Closed Loop Tuning
• Eight High Impedance Injector Drivers, Ideal for Stock LS Injectors and Holley EFI Injectors
• Integrated 1-Bar MAP Sensor for Naturally Aspirated or Nitrous Setups, with Harness Support for External Higher Bar Sensors if needed
• 4 Configurable Inputs (12V, Ground, 5V, Frequency) and 2 Outputs (Ground, PWM) - Ideal for Electric Fans, Boost Control Solenoids, Nitrous Control and more
• Free PC Tuning Software via USB/CAN Interface for Full Laptop Control and Advance Setup
• Integrated 3.5" Touchscreen Handheld with Setup Wizard, Internal Data Logging, and Real Time Gauge Displays
• Terminator X Max ECU will Include a Base Timing Map Pre-Configured for this engine.

Also Includes:

• LS Swap Oil Pan - Windage Tray - Pick Up Screen
• BluePrint Engines Fuel Injectors and Rail
• DBW Throttle Body - BPP12191019
• 2.65 Liter Magnuson TVS 2650 Supercharger
• Throttle Pedal, and Sensors
• Spark Plugs & Wires
• Harmonic Balancer
• Coil Packs

Natural Front Accessory Drive:

• 150-amp Alternator
• LT3 Style Water Pump
• Power Steering Pump with Attached Reservoir
• Compact Style Air Conditioning Compressor 

Assembled with Complete Performance Built 4L80E Four Speed Automatic Transmission Package:

• 4l80E Complete Package
• Electronic Transmission Controller Included
• 3000+ Stall Torque Converter
• Flex Plate
• Starter
• 4L80E Gear Ratios:

1: 2.482

2: 1.482

3: 1.00

4: 0.750

R: 2.077