Product Summary

Connect and Cruise Crate Engine Type, Oil Pan Included

  • BluePrint 347 stroker delivers 415 horsepower and 415 ft.-lbs. of torque
  • Polished front accessory drive
  • Holley 600 CFM Street Warrior carburetor and dual plane intake
  • Forged pistons, 10.0:1 compression, aluminum heads, and hydraulic roller cam
  • Complete TKX manual transmission package includes clutch, hydraulic throwout bearing, bellhousing, flywheel, starter, and overdrive
See more details

Key Specs

Crate Engine TypeConnect and Cruise
Compression Ratio10.0:1
Engine Displacement347 cu. in.
Camshaft TypeHydraulic Roller Tappet
Cylinder Head MaterialAluminum
See more specs

Need To Know

Made to Order

This custom item will ship when completed

Truck Shipment

Truck shipments must be pre-paid with a credit card, certified check or money order

Quick and Easy Returns

Return Policy

BluePrint Engines B347KTKX Details

This BluePrint Builder Series 347 c.i. engine and TKX manual transmission package is a high-output carbureted small block Ford stroker setup built for strong street performance and an engaging five-speed driving experience. Delivering 415 horsepower and 415 ft.-lbs. of torque, it combines forged pistons, aluminum heads, a hydraulic roller cam, a Holley 600 CFM Street Warrior carburetor, and a polished front accessory drive with a complete TKX transmission package for a powerful, responsive combination with classic V8 character.

  • BluePrint 347 stroker delivers 415 horsepower and 415 ft.-lbs. of torque
  • Polished front accessory drive
  • Holley 600 CFM Street Warrior carburetor and dual plane intake
  • Forged pistons, 10.0:1 compression, aluminum heads, and hydraulic roller cam 
  • Complete TKX manual transmission package includes clutch, hydraulic throwout bearing, bellhousing, flywheel, starter, and overdrive

Block:

  • BluePrint Engines High Strength Cast Iron Block
  • Increased Deck Thickness and Strength Webbing
  • Priority Main Oiling
  • 4.000" Bore
  • 4-Bolt Main
  • 1-Piece Rear Main Seal
  • Improved Water Jacket Design

Rotating Assembly:

  • Cast Crankshaft
  • 3.400" Stroke
  • Forged I-Beam 5.400" Connecting Rods
  • Forged Pistons
  • 28oz Externally Balanced Front and Rear

Cylinder Heads:

  • BluePrint Aluminum Cylinder Heads - HP9009
  • 60cc Chamber
  • 2.02" Intake / 1.60" Exhaust Valves
  • 190cc Intake / 65cc Exhaust Runners

Cam Specs:

  • Hydraulic Roller
  • .543 Intake / .554 Exhaust Lift
  • 218 Intake / 226 Exhaust Duration
  • @.050-112 Degree Lobe Separation

Ignition Timing:

  • 34 Degrees Total at 3500 RPM

Also Includes:

  • Holley 600 CFM Street Warrior Carburetor - BPP080457SA
  • Mustang Style Valve covers *Mustang scripted valve cover may be different than pictured based on availability*
  • Dual Plane, Satin Aluminum Intake Manifold
  • Pro Billet Distributor
  • 7 Quart Oil Pan
  • Electric Fuel Pump Black
  • Thermostat and Thermostat Housing
  • Polished Front Accessory Drive - BPP302FDACPS4
  • Driver Side Standard Rotation Water Pump
  • Type II Power Steering Pump
  • Remote Power Steering Pump Reservoir
  • 140amp 1-wire Alternator
  • 7B10 Peanut Air Conditioning Compressor

Assembled with Complete TKX Transmission Package:

  • Mcleod Super Street Pro Single Disk Clutch
  • Hydraulic Throw Out Bearing
  • Aluminum Bell Housing
  • Flywheel
  • Engine Guard
  • Starter

First Gear Ratio: 2.87:1

Second Gear Ratio: 1.89:1

Third Gear Ratio: 1.28:1

Fourth Gear Ratio: 1.00:1

Fifth Gear Ratio: 0.81:1

CARB Warning

Follow EPA, CARB, and state regulations for engine changes

Emissions warning: this part is for vehicle engine changes, not direct oem engine replacements. In California, engine changes are legal when done in compliance with California bureau of automotive repairs (bar) engine change policy. For assistance, call bar referee at: (800) 622-7733. And see https://bar.Ca.Gov/consumer/smog_check_program/engine_changes. All customers must comply with federal epa mobile source enforcement memorandum no. 1a (and addendum) and all applicable state regulations when conducting engine changes. Improper installation and/or use of this part in California may subject the installer and/or owner to a $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and laws of all states for use of this engine change part on makes or models of vehicles that render them noncompliant with applicable state and/or federal emission laws with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine

BluePrint Engines B347KTKX Specifications

KEY SPECS
MFG. Part #B347KTKX
BrandBluePrint Engines
Crate Engine TypeConnect and Cruise
Compression Ratio10.0:1
Engine Displacement347 cu. in.
Camshaft TypeHydraulic Roller Tappet
Cylinder Head MaterialAluminum
Piston MaterialForged Aluminum
Crankshaft MaterialCast Steel
Carburetor IncludedYes
Intake Manifold IncludedYes
Distributor IncludedYes
Connecting Rod MaterialForged Steel
Valve Covers IncludedYes
Cylinder Heads IncludedYes
Throttle Body IncludedNo
Timing Cover IncludedYes
Oil Pan IncludedYes
Water Pump IncludedYes
Harmonic Balancer IncludedYes
Flexplate IncludedNo
Flywheel IncludedYes
Air Cleaner IncludedYes
Spark Plugs IncludedYes
Spark Plug Wires IncludedYes
Computer IncludedNo
Wiring Harness IncludedYes
GENERAL
Torque415 ft./lbs.
Horsepower415 horsepower
Combustion Chamber Volume60cc
Camshaft Duration (.050 in)218° intake / 226° exhaust
Camshaft Lift (in).543 intake / .554 exhaust
Sold in QuantityKit

Questions & Answers

Customer Impersonation Script