Built with BluePrint Small Block Chevy Engine Part BPP38350RA. 49 State Legal, California Executive Order# D-824-1
- BluePrint Engines 383CI Stroker Crate Engine for 1996-2000 GM Vortec Truck/SUV
- No ECU Tuning Required, Dyno Tested Longblock
- +47 Rear Wheel Horsepower Increase over Stock
- + 55 Rear Wheel ft/lbs Torque Increase over Stock
- Aluminum Heads, Hydraulic Roller Cam, Cast Steel Crank, and Hypereutectic Pistons
- Compression Ratio: 10:1
BLOCK:
NEW BluePrint Cast Iron Block
Manufactured and Machined in the USA!
4-Bolt Main
1-Piece Rear Main Seal
Mech fuel pump provision: Yes
Passenger Side Dipstick
Drilled and tapped for clutch linkage
ROTATING ASSEMBLY:
New BluePrint Steel crankshaft
3.750" Stroke
OEM type 5.700" connecting rods w/ 150,000 psi bolts
Hypereutectic pistons
Externally Balanced Front/ Externally Balanced Rear
CYLINDER HEADS:
BluePrint Aluminum Cylinder Heads - H8002K
64cc chamber
2.02" intake/1.60" exhaust valves
195cc intake/75cc exhaust runners
CAM SPECS:
Cam Type: Roller
.477 Intake .471 Exhaust
202 Intake / 212 Exhaust duration
@ .050 - 115 degree lobe separation
IGNITION TIMING:
Computer Controlled
WARRANTY:
30 month / 50,000 mile
NOTES:
This 383 stroker is designed for use in 1996 - 2000 Chevrolet Pick up or SUV that was originally equipped with a 350ci (5.7L) engine.
No ECU tuning or recalibration is required.
Advertised horsepower gains were achieved on chassis dyno, w/ factory EFI and ECU, in a Vortec equipped, otherwise stock, GM truck.
We have taken our BluePrint Replacement Block and assembled the Small Block Chevy Kit to give you a 24% increase of 49 state legal horsepower, when installed in a GM pickup or SUV year 2000 or older model year that came with a California certified Gen 1 naturally aspirated 5.7 gasoline engine block.
This engine may require modification to existing front accessory drive mounting brackets if retaining oem front accessory drive.
This engine kit has a California Air Resources Board (C.A.R.B.) Executive Order (E.O.) number: D-824-1.