|
#227BP3027CT
BluePrint BP3027CT Ford 302 Long Block Crate Engine, 370 HP
Discontinued
This item is currently not available
Shop all BluePrint Ford Crate Engines
Key Specs
| Crate Engine Type | Long Block |
| Engine Displacement | 302 cu. in. |
| Horsepower | 370 horsepower |
| Compression Ratio | 9.5:1 |
| Torque | 350 ft./lbs. |
Need To Know
Truck Shipment
Truck shipments must be pre-paid with a credit card, certified check or money order
Need help?
855.313.9176Quick and Easy Returns
Return PolicyBluePrint Engines BP3027CT Details
BluePrint Engines BP3027CT Details
True Blue Power! BluePrints pro engine builders are enthusiasts just like you and it shows in the quality and performance of every engine they build. Each BluePrint crate engine is carefully dyno tested and ships with printed, proven results. If you’re looking serious horsepower at an affordable price, BluePrint Engines is the choice for you!
- 370 HP/350 FT Lbs
- 9.5:1 Compression Ratio
- Ford 302
Block
- Hand-picked seasoned
- Square and parallel decked
- Align honed main bearing bore
- Cylinders honed on computer controlled machine to within .0002 straightness and roundness
- Cylinders are sonic tested for thickness
- 2-Bolt Main
- 4.000" Bored .040" Over
- 1-Piece Rear Main Seal
- Mech fuel pump provision: Yes
Rotating Assembly
- Ford, machined and balanced by BluePrint Engines
- 3.000" Stroke
- Upgraded 5.090" connecting rods w/ 150,000 psi bolts
- Hypereutectic pistons
- Cast Steel Crankshaft
- 50oz External balance
Cylinder Heads
- BluePrint Aluminum Cylinder Heads -HP9009
- 60cc chamber
- 2.02" intake/1.60" exhaust valves
- 190cc intake/60cc exhaust runners
Cam Specs
- Roller Cam
- .543 Intake / .554 Exhaust
- 218 Intake / 226 Exhaust Duration @ .050 - 112 Degree Lobe Separation
Ignition Timing
- 10-16 degrees initial, 32-34 total
Also Includes
- Dual Sump Oil Pan
- Valve Covers
- Timing Cover
- Dyno test results shipped with engine
Warranty
- 30 month / 50,000 mile
Notes
- Painted Ford Blue
- Recommended Oil: BPP710 BluePrint Engines Crate Engine Break-In Oil
- Recommended Stall Converter: 1800-2200
- Recommended Fuel: 91 Octane
- Engine requires a V-belt standard rotation water pump and belt system
- Engine timing cover is designed for standard rotation water pump ONLY
Learn more about these crate engines by reading our article, "Building a Better SBF" as featured in Custom Classic Trucks Magazine.
Charts
Guides & Documents
CARB Warning
Follow EPA, CARB, and state regulations for engine changes
CARB Warning
Follow EPA, CARB, and state regulations for engine changes
Emissions warning: this part is for vehicle engine changes, not direct oem engine replacements. In California, engine changes are legal when done in compliance with California bureau of automotive repairs (bar) engine change policy. For assistance, call bar referee at: (800) 622-7733. And see https://bar.Ca.Gov/consumer/smog_check_program/engine_changes. All customers must comply with federal epa mobile source enforcement memorandum no. 1a (and addendum) and all applicable state regulations when conducting engine changes. Improper installation and/or use of this part in California may subject the installer and/or owner to a $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and laws of all states for use of this engine change part on makes or models of vehicles that render them noncompliant with applicable state and/or federal emission laws with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine
BluePrint Engines BP3027CT Specifications
BluePrint Engines BP3027CT Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | BP3027CT |
| Brand | BluePrint Engines |
| Crate Engine Type | Long Block |
| Engine Displacement | 302 cu. in. |
| Horsepower | 370 horsepower |
| Compression Ratio | 9.5:1 |
| Torque | 350 ft./lbs. |
| Camshaft Type | Hydraulic Roller |
| Cylinder Head Material | Aluminum |
| Piston Material | Hypereutectic Aluminum |
| Crankshaft Material | Cast Steel |
| Camshaft Duration (.050 in) | 218° intake / 226° exhaust |
| Camshaft Lift (in) | .543 intake / .554 exhaust |
| Bore x Stroke (in) | 4.000" bored .040 over x 3.000" |
| Carburetor Included | No |
| Intake Manifold Included | No |
| Distributor Included | No |
| Valve Covers Included | Yes |
| Engine Balance | External |
| Imbalance | 50 oz. |
| Cylinder Heads Included | Yes |
| Rear Main Seal Style | 1-piece |
| Oil Pan Included | Yes |
| Timing Cover Included | Yes |
| GENERAL | |
| Warranty | 30 month/50,000 mile |
| Assembled | Yes |
| Intake Valves Included | Yes |
| Intake Valve Diameter | 2.02" |
| Exhaust Valves Included | Yes |
| Exhaust Valve Diameter | 1.6" |
| Valve Spring Included | Yes |
| Head Gaskets Included | Yes |
| Camshaft Included | Yes |
| Block | 2 bolt main |
| Sold in Quantity | Each |