|
#91031917
$377.99
/kit
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Front Position, 11 Inch Rotor Diameter, Natural
Comes as a Kit
View Kit Components
| MFG. Part # | 91031917 |
| Position | Front |
| Wheel Bolt Pattern (in.) | 5x4.75 in. |
| Wheel Bolt Pattern (mm) | 5x120.65 mm |
| Rotor Diameter | 11 Inch |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyBasic Disc Brake Kit:
Rotor:
Caliper:
Mid and full size GM style caliper is a standard full size GM caliper used for years on many vehicles (1969-72 Chevelle, 73-77 A-Body, 1969-1981 Camaro, 1977 Caprice, S-10 pickups, etc). It will fit any bracket / spindle designed for the large GM calipers (7” mount width).
Wheel Bearing:
Fits tapered-bearing hubs. Works with stepped shaft spindles
Brake Pads:
Learn how to properly Bed-In your brake pads by reading our tech article. Bedding-In Brake Pad Procedure.
Bearing Cups:
These steel inner bearing cones are replacement for our GM to Ford brake conversion bearing and seal kits. Fits tapered-bearing hubs. Works with stepped shaft spindles.
Kit Includes:
Charts
| KEY SPECS | |
|---|---|
| MFG. Part # | 91031917 |
| Brand | Speedway Motors |
| Position | Front |
| Wheel Bolt Pattern (in.) | 5x4.75 in. |
| Wheel Bolt Pattern (mm) | 5x120.65 mm |
| Rotor Diameter | 11 Inch |
| Rotor Type | Vented |
| Caliper Pistons | One |
| Caliper Finish | Natural |
| Parking Brake Provision | No |
| Minimum Recommended Wheel Diameter | 15 Inch |
| Rotor Shape | Round |
| Hardware Included | Yes |
| Rotor Style | Plain Face |
| Front Rotor Included | Yes |
| Front Rotor Diameter | 11 Inch |
| Front Caliper Included | Yes |
| Rear Caliper Included | No |
| Front Spindles Included | No |
| Master Cylinder Included | No |
| Brake Booster Included | No |
| Brake Hoses Included | Yes |
| Rear Rotor Included | No |
| Bolt Pattern | 5 on 4.75" |
| Finish | Natural |
| Color | Natural |
| Front Caliper Finish | Natural |
| Front Caliper Piston Quantity | 1 |
| GENERAL | |
| Sold in Quantity | Kit |
| Notes | Includes rotors, bearings and seals, calipers, pads, brake hoses, brake tabs, and caliper brackets. |
| Rotor Thickness | 1" |
| Stud Diameter | 0.44" |
| Stud Length | 0.94" |
| Thread Pitch | 7/16"-20 |
| Rotor Material Type | Cast Iron |
4.6
15 Reviews
Customers highly endorse the product for its quality, ease of installation, and impressive stopping power. The kit's completeness is praised, with it having everything required for a disc brake conversion. Its usability is a noted feature, with no need for additional parts or modifications. The product withstands comparison, being preferred due to its practicality and superior performance. The product's materials are of good quality and added safety is highlighted with enhanced stopping power. These qualities make the product a favored choice, with several users willing to repurchase and recommend it.
4.6
15 reviews
5
12
4
2
3
0
2
0
1
1
Most Liked Positive Review
5.0
1948-1956 Ford Half Ton Deluxe Disc Brake Kit, 5 x 4-3/4 Inc
Good quality and easy to install. No modifications needed. Will make my Gasser stop a lot better. Would recommend to anyone.
Most Liked Negative Review
1.0
Product was pretty bad
The kit came with spindle Adaptors that slide on the spindle to increase its size for the larger GM bearings and seals. The seals included in the kit were so loose fitting on the adaptors that I could see daylight between them. No way this would retain grease. The brake shoes were so poor quality that that would move around 3/8 of an inch much in all directions once installed and they would actually touch the center of the hub and would have ground against it. I had to source and pay for my own seals and brake shoes. Customer service was no help as they were not familiar with the kit and when I tried to explain the issues to The tech he said," well you bought a budget kit". I would not recommend this kit to anyone and would not buy it again.
Filter by Ratings
Product was pretty bad
1.0
5 months ago
Disgruntled sucker
Sacramento CA.
Verified
The kit came with spindle Adaptors that slide on the spindle to increase its size for the larger GM bearings and seals. The seals included in the kit were so loose fitting on the adaptors that I could see daylight between them. No way this would retain grease. The brake shoes were so poor quality that that would move around 3/8 of an inch much in all directions once installed and they would actually touch the center of the hub and would have ground against it. I had to source and pay for my own seals and brake shoes. Customer service was no help as they were not familiar with the kit and when I tried to explain the issues to The tech he said," well you bought a budget kit". I would not recommend this kit to anyone and would not buy it again.
Would Not Recommend
Worked great on my T Bucket
5.0
10 months ago
Bob
Poconos
Verified
The disc brake conversion kit worked great on my T Bucket. Everything was included and it went together easily.
Would Recommend
Instructions are a little vague, prefit everything
4.0
11 months ago
Steven
Illinois
Verified
Everything fit as expected except didn't need the spacers on the spindles, not sure why they're included in the kit. And I believe the brake pads should come with the anti-raddle clips. I was made to order those separate.
Would Recommend
I would buy this again.
5.0
a year ago
Fast55
Ohio
Verified
Great product, used to convert old drum brakes to disc without issue. Works great and looks good as well.
Would Recommend
Great Kit.
5.0
a year ago
Fast55
Ohio
Verified
Perfect kit to change my truck from the big drum brakes to disc. Kit includes everything needed and works great.
Would Recommend
Easy and fast
5.0
6 years ago
Sam
Elkview wv
Verified
Great set up !
Would Recommend
I will use this kit again
5.0
6 years ago
Jrheavyduty
Gulfport Ms
Verified
Kit contained everything
Would Recommend
Disk brake conversion
5.0
6 years ago
Kevin
Roseburg Oregon
Verified
Don't need any additional parts. This is a complete set
Would Recommend
THIS IS A VERY EASY TO INSTALL DISC BRAKE CONVERSION.
5.0
7 years ago
NONE
BELLEVILLE WI
Verified
THOUGHT AND EASE OF INSTALL SHOWS IN THIS DISC BRAKE CONVERSION
Would Recommend
great product
5.0
9 years ago
super Dave
lake elsinore, ca.
Verified
adds massive stopping power, easy to install
Would Recommend
Showing 10 of 15 reviews
8 Questions • 9 Answers
If I need to replace parts in the future, are these standard parts from a certain make, model and year that I could go into a NAPA store and buy them? If so what is the information needed to request parts?
by JAMES
• 6 years ago
1 answer
View Answer
Am I able to use a 14" diameter wheel with this kit without any modifications or would it be best to use a 15" diameter wheel or larger?
by T-Rev
• 7 years ago
1 answer
View Answer
Do you sell the bearings and seals separate as mine are worn out?
by kris
• 11 years ago
1 answer
View Answer
Is there a chevy spindle that works for the ford axle or do I just use this kit on the factory ford spindle on the 51 f1 axle? I've just always heard the chevy spindles are better. Thanks
by Stu
• 11 years ago
1 answer
View Answer
will it also work on the rear of the truck or do you have a kit for both
by milkman50
• 11 years ago
1 answer
View Answer
Will this kit change the track measurement, and if so, how much and which direction?
by bluemoon
• 12 years ago
1 answer
View Answer
disc brakes I have a 1953 ford pickup. wold like to put disc brakes on it and would like tro know if this kit would fit with my rims which are 5.5 from edge to center.
by fredericks
• 13 years ago
1 answer
View Answer
will this conversion be successful without a boosted master cylinder
by Jim
• 14 years ago
2 answers
View Answers
8 of 8 questions shown
1953-1956 Ford F-100
1948-1952 Ford F1
