Hudson Rambler Data Acquisition Hardware

Tim talks about the process of upgrading the factory hubs on his 1929 Roadster project with new manufacture units courtesy of Speedway Motors.

See how to install 3" Ram Horn exhaust manifolds on a C/10 with a 406 engine. Learn some tips on welding steel tubing to a cast iron manifold and how they are modified to fit the truck.

The HANS Device has proven to save the lives of racers time and again. We'll show you how to select the right HANS Device for your specific needs here.

Pat shows that exhaust can make a difference on even your daily driver. Check out this video of Pat with the Hooker Muffler installed on his '03 Suburban.

Hooker headers are installed in a 1967 Pontiac Firebird for increased power and a boost in performance. See how to work through fitment of the steering box, clutch Z bar and starter.

This article explains how to install a chrome column shifter into the steering column itself. We will help you determine the length of steering column needed along with all the parts required to get the job done.

One of the most challenging things about swapping transmissions can be figuring out the clutch linkage. Speedway can show you how to install the upgraded hydraulic throwout bearing with ease.

In this Tech Tip, John explains the design behind a set of headers destined for a Tri-5 using a traditional rack and pinion style steering system.

Learn how to use a windshield remover tool to assist with in-depth builds. A step-by-step guide to windshield removal.