GMC 1000 Fasteners and Hardware Parts

There are several types of quarter-turn fasteners used in the performance automotive aftermarket and in this buyer's guide we'll help show you the correct fastener for your application and how some of the most common types of fasteners are used.

Building GM’s LQ4 6.0L Gen 3 LS engine for various power levels is easy with the right performance parts recipe.

Speedway Motors employee Jess M. walks us through adding a little salt flat flair to her 1933 Ford coupe, by using moon discs and quarter turn fasteners.

See how to install 3" Ram Horn exhaust manifolds on a C/10 with a 406 engine. Learn some tips on welding steel tubing to a cast iron manifold and how they are modified to fit the truck.

Hooker headers are installed in a 1967 Pontiac Firebird for increased power and a boost in performance. See how to work through fitment of the steering box, clutch Z bar and starter.

Read up on GM 10 bolt ring and pinion installation instructions. Follow along as our employee Zach installs a GM 10 bolt rebuild kit from Motive Gear.

Dick from Koul Tools shares a tip on how to properly seat the AN fittings using the Koul Tools device.

In this budget build, a GM rear end is upgraded in order to hold 400+ HP. See how spherical bushings are replaced in a used 8.5” GM 10 bolt rear end.

Steve provides a step-by-step guide to install the Speedway Motors GM 10-Bolt Polished Finned Aluminum Rear End Cover.

Hose & Fitting