1987 Chevy G30 Fasteners and Hardware Parts

There are several types of quarter-turn fasteners used in the performance automotive aftermarket and in this buyer's guide we'll help show you the correct fastener for your application and how some of the most common types of fasteners are used.

Speedway Motors employee Jess M. walks us through adding a little salt flat flair to her 1933 Ford coupe, by using moon discs and quarter turn fasteners.

Speedway Motors employee Pat takes a few minutes to talk about the Mag Daddy Magnetic Fasteners available at Speedway Motors.

Ever had brand new bolts or nuts bind up on you? Take a minute to read through the steps you should take anytime you’re building an engine or installing new hardware.

Kevin W. walks through each step of installing a new alternator bracket on a 454 Big Block Chevy.

In this Tech Tip, a returning customer asks for advice on wiring harnesses for his ’29 Ford roadster project.

In this Tech Tip, a customer asked about a discreet style trunk latch for his 1932 Ford.

In this budget build, a GM rear end is upgraded in order to hold 400+ HP. See how spherical bushings are replaced in a used 8.5” GM 10 bolt rear end.

Learn about the power behind the G-body platform and the steps to upgrade a 7.5" bolt rear end to a 8.5" to withstand high horsepower. See how to change the differential fluid and install new gaskets.

See how to install 3" Ram Horn exhaust manifolds on a C/10 with a 406 engine. Learn some tips on welding steel tubing to a cast iron manifold and how they are modified to fit the truck.