1976 GMC G35 Electrical, Lighting and Wiring Parts

Check out this headlight wiring and taillight wiring diagram.

This project consists of using welding cable to relocate a battery to the trunk of a 1967 Chevelle. Learn the benefits of using welding cable over normal battery cable and how line clamps are used to secure the wire to the frame rail.

Learn about the wiring of GM HEI Ignition Distributors with our diagrams and guide. Ensure you are getting the best performance out of your ignition system.

Learn how to install 1970-73 RS Camaro reproduction parking lamps and how to overcome some obstacles during the installation.

In this Tech Tip, a returning customer asks for advice on wiring harnesses for his ’29 Ford roadster project.

Are your gauges reading erratically or does your car run out of power at high rpm? It may be the cause of a bad ground. Speedway Motors can show you how to diagnose and fix the problem in no time at all!

In this budget build, a GM rear end is upgraded in order to hold 400+ HP. See how spherical bushings are replaced in a used 8.5” GM 10 bolt rear end.

Learn about the power behind the G-body platform and the steps to upgrade a 7.5" bolt rear end to a 8.5" to withstand high horsepower. See how to change the differential fluid and install new gaskets.