1951 Studebaker 2R10 Fasteners and Hardware Parts

There are several types of quarter-turn fasteners used in the performance automotive aftermarket and in this buyer's guide we'll help show you the correct fastener for your application and how some of the most common types of fasteners are used.

Speedway Motors employee Jess M. walks us through adding a little salt flat flair to her 1933 Ford coupe, by using moon discs and quarter turn fasteners.

In this Tech Tip, John makes a few suggestions for a customer looking to update the braking system on his ’51 Deluxe.

In Episode 2 of our '68 C10 build, we rip it apart, clean up 54 years of rust and dirt, and get to work on the rear suspension.

Testing a 2 or 3 wire speed sensor sounds difficult, but these videos show that it actually is quite easy!

Read how to install rear drop spring to lower a 1969 C10 pickup. Follow these steps for a smooth installation.

See how to install 3" Ram Horn exhaust manifolds on a C/10 with a 406 engine. Learn some tips on welding steel tubing to a cast iron manifold and how they are modified to fit the truck.

We've come a long way on our '68 C10 project, but we still have a long way to go. Watch as Kevin and Joe discuss where we're at and where we're going.

In this Tech Tip, John responds to a customer question about tubular control arms.

In this Tech Tip, a returning customer asks for advice on wiring harnesses for his ’29 Ford roadster project.