Wilwood 260-14243-BK Remote Tandem Master Cylinder, Black
Disc/Drum Brake System Type, Tandem/Both Sides Outlet Count, Remote Reservoir Type, Black
- Features a 1” bore that can be used in manual and power assisted applications and does not come with a pushrod
- The mounting flanges measure from 3.22" to 3.40"
- Will fit most domestic cars and trucks from the mid-1960s to present
- There are fluid ports located on both sides of the bore
- It is fully machined of high-pressure die castings and has a black e-coat finish for added protection
Wilwood’s Remote Black Tandem Master Cylinder features a 1” bore that can be used in manual and power assisted applications and does not come with a pushrod. The mounting flanges measure from 3.22" to 3.40" which is common for domestic cars and trucks from the mid-1960s to present.
- Fluid Ports located on both sides of the bore
- Machined of high-pressure die castings
- Sold each
Overall Length(in): 7.16"
Flange to End Length (in): 6.56"
Inlet Size (in): .87" or 11/16"-20
Inlet Fit (in): 1/4" Hose
Outlet Size 1 (in): 1/2"-20
Outlet Fit 1 (in): 3/8"-24 IF or 1/2"-20 IF
Outlet Size 2 (in): 1/2"-20
Outlet Fit 2 (in): 3/8"-24 IF or 9/16"-18 IF
- Get FREE shipping when your order includes this item and exceeds $99! Ground shipping only in the contiguous US.
More Like This
Wilwood 261-14252-BK Remote Tandem Master Cylinder Kit, 1-1/8 In
Wilwood 260-14241-BK Remote Master Cylinder w/pushrod, Black
Wilwood 261-14249-BK Remote Tandem Master Cylinder Kit, 7/8 In, Black
Wilwood 261-14250-BK Remote Tandem Master Cylinder Kit, 15/16 In, Black
Wilwood 261-14251-BK Remote Tandem Master Cylinder Kit, 1 Inch, Black
Wilwood 260-14244-BK Remote Tandem Master Cylinder, Black
Wilwood 260-14784 Compact Remote Flange Mount Master Cylinder
Wilwood 260-14790 Compact Remote Side Mount Master Cylinder
Wilwood 260-14241-P Remote Tandem Master Cylinder w/Pushrod, Plain
Wilwood 260-14244-P Remote Tandem Master Cylinder, Polished
Q & A
Learn how to bench bleed a new master cylinder. Removing the air before installation is critical. Our video tutorial will walk you through the process.
Check out the 410 sprint car brake installation and bleeding the brakes! We're making serious progress on our build.
Tim talks about brake booster adjustment.
Tim talks about why using a new pedal assembly may be better for your project than the original pedal assembly.
Speedway Motors employee Pat O. talks about the CPP Hydroboost Brake System.
In this Tech Tip, John makes a few suggestions for a customer looking to update the braking system on his ’51 Deluxe.
Should you use single or dual diaphragm brake boosters? Read our guide to learn which is best for your four wheel drum or four wheel disc brake system.