How to Measure Required Steering Column Length in Three Easy Steps
Your steering column length will not always be identical to the factory column due to several factors, including seating position, steering linkage connection (converting from a gear box to a rack-and-pinion for example), and other factors. For that very reason we highly recommend you measure your specific application for the best fitment.
Start with your dash/gauge cluster installed and your seating position confirmed so that you can determine proper steering wheel placement. Consider having your steering wheel of choice in hand as well for even more accurate measuring.
Step 1:
All our columns feature a 7-inch bell, which is the top portion where the tilt mechanism and turn signal switch reside. So, you will need to confirm you have a minimum clearance of seven inches between your dash and steering wheel.
Step 2:
Measure from the back face of your steering wheel (taking into consideration any steering wheel adapter thickness) to your firewall.
Step 3:
Add 3-inches to this value for proper column pass through distance into the engine bay to get your column length total and then round up or down to the nearest column length we offer (30-, 32-, or 33-inch length) depending upon personal preference.
Additional Notes for Floor Shift Applications:
- Verify column length needed to prevent the steering wheel hitting the dash when you tilt the wheel up
- Main column ground is attached to the column tube and needs to be secured to chassis ground
- The black wire in the ribbon harness is the ground for the horn relay
Replacement Parts
A replacement turn signal switch assembly is available for this column.
Your steering column length will not always be identical to the factory column due to several factors, including seating position, steering linkage connection (converting from a gear box to a rack-and-pinion for example), and other factors. For that very reason we highly recommend you measure your specific application for the best fitment.
Start with your dash/gauge cluster installed and your seating position confirmed so that you can determine proper steering wheel placement. Consider having your steering wheel of choice in hand as well for even more accurate measuring.
Step 1:
All our columns feature a 7-inch bell, which is the top portion where the tilt mechanism and turn signal switch reside. So, you will need to confirm you have a minimum clearance of seven inches between your dash and steering wheel.
Step 2:
Measure from the back face of your steering wheel (taking into consideration any steering wheel adapter thickness) to your firewall.
Step 3:
Add 3-inches to this value for proper column pass through distance into the engine bay to get your column length total and then round up or down to the nearest column length we offer (30-, 32-, or 33-inch length) depending upon personal preference.
Additional Notes for Floor Shift Applications:
- Verify column length needed to prevent the steering wheel hitting the dash when you tilt the wheel up
- Main column ground is attached to the column tube and needs to be secured to chassis ground
- The black wire in the ribbon harness is the ground for the horn relay
Replacement Parts
A replacement turn signal switch assembly is available for this column.
For replacement key and tumbler, please purchase part # 91603299 separately.
