Universal Aftermarket Fuel Tank Gas Gauge Level Sender Unit
Universal Aftermarket Fuel Tank Gas Gauge Level Sender Unit
Speedway Motors

|

#91065082

Universal Aftermarket Fuel Tank Gas Gauge Level Sender Unit

  • Fuel Tank Sender Assemblies feature 240 ohms empty, 33 ohm full sender
  • Adjustable depth from 6" to 24"
  • Can be used as a right hand or left hand swing unit with minor adjustment
See More

$36.99

/each

In Stock


Quantity

Need Help? Call to Order

Add to a list

Share

Select a vehicle to verify Fitment

Select Vehicle

Product Summary

Universal Fit, 24" Overall Length, Height Adjustable

  • Fuel Tank Sender Assemblies feature 240 ohms empty, 33 ohm full sender
  • Adjustable depth from 6" to 24"
  • Can be used as a right hand or left hand swing unit with minor adjustment
  • This fuel sender comes with a seal and all mounting hardware
  • Works with our part #910-65042 fuel gauge
See more details

Key Specs

MFG. Part #91065082
BrandSpeedway Motors
Overall Length24"
Ohm Range240 ohms empty, 33 ohms full
Height AdjustableYes
See more specs

Need To Know

Need help?

855.313.9176
View the Help Center

Quick and Easy Returns

Return Policy

Speedway Motors 91065082 Details

These sending units are also included in our 910-65042 fuel level gauge kit. They will work in tanks from 6" to 24" deep and can be used as a right hand or left hand swing unit with minor adjustment.  This fuel sender comes with a seal and all mounting hardware. 

  • 240 ohms empty, 33 ohm full
  • Adjustable depth from 6" to 24"
  • Right or left hand swing
  • 2-3/4" flange OD
  • Overall Length: 15.50"
  • Includes sealing gasket and mounting hardware

Learn more about selecting the proper fuel sending unit by reading our tech article, Fuel Sending Units.

Charts

Specs

This sender requires a 12 volt electrical system

Speedway Motors 91065082 Specifications

KEY SPECS
MFG. Part #91065082
BrandSpeedway Motors
Overall Length24"
Ohm Range240 ohms empty, 33 ohms full
Height AdjustableYes
GENERAL
Bolt Hole PatternSAE 5 hole (2.125 in. bolt circle)
Sold in QuantityEach

Ratings & Reviews

4.8

36 Reviews

Overall Assessment

Customers appreciate the product for its quality, usability, and practicality, particularly for its compatibility with different types of fuel tanks and gauges. The adjustable range feature enables adaptability to varying ohm requirements. The solid float is appreciated for its leak prevention. The product is easy to install, with clear instructions included, and is noted for its excellent construction quality. It can be easily trimmed to fit, with some users needing minor adjustments for perfect fit. Overall, the product garners high recommendations for its performance and value for money over competitor products.

Write A Review

4.8

36 reviews

5

33

4

1

3

1

2

1

1

0

Most Liked Positive Review

5.0

Customer service is the best !!

I have ordered thousands of dollars worth of parts over the last two years. I am restoring my high school 54 ford f100. I've bought 80% of my parts from speedway because the website is easy to use, free shipping above a certain amount purchased and no hassles if there's a problem!!! I've not encountered any issues except last week. I bought a fuel tank with sending unit a year and 1/2 ago and just installed it. I couldn't get the gauge to work. I called the tech like and spoke with Kelly and he agreed it's a weird problem and they would send me a new fuel sending unit. Not only did the higher ups send it for free even though it was out of warranty they paid for two day shipping cause I needed it for this weekend!!!! That's why I buys my parts from speedway motors!!! Thanks guys!! BTW. My part just arrived!!! PS we weren't sure if it was the sending unit so I will update them in a few days

Most Liked Negative Review

3.0

I would probably not buy this product again.

I would probably buy a sending unit with a ring that slides up and down the tube if I had it to do over. I believe it would be an easier and more accurate installation. But overall satisfied.

Filter by Ratings

THIS PRODUCT WAS PERFECT FIT FOR MY 1940 PANEL

5.0

a month ago

Lots of glass

BELLMEAD TX

Verified

INSTALLED IN MY 1940 PANEL AND WORKED JUST GREAT.

Would Recommend

I would buy this sender again if I needed another one.

5.0

6 months ago

Koda

Iowa

Verified

I used this sender on an earlier Dodge D50 pickup tank. It was very adjustable and didn't need much for modifications. This is the only one I could find to work.

Would Recommend

Customer service is the best !!

5.0

9 months ago

Don Pommerville

Lompoc ca

I have ordered thousands of dollars worth of parts over the last two years. I am restoring my high school 54 ford f100. I've bought 80% of my parts from speedway because the website is easy to use, free shipping above a certain amount purchased and no hassles if there's a problem!!! I've not encountered any issues except last week. I bought a fuel tank with sending unit a year and 1/2 ago and just installed it. I couldn't get the gauge to work. I called the tech like and spoke with Kelly and he agreed it's a weird problem and they would send me a new fuel sending unit. Not only did the higher ups send it for free even though it was out of warranty they paid for two day shipping cause I needed it for this weekend!!!! That's why I buys my parts from speedway motors!!! Thanks guys!! BTW. My part just arrived!!! PS we weren't sure if it was the sending unit so I will update them in a few days

Would Recommend

Yes for the fuel sender

5.0

9 months ago

32Ford

Jax., Fl

Verified

Everything was perfect

Would Recommend

I would buy this product again

5.0

9 months ago

Bob

Granger, Iowa

Verified

The Sending unit worked great in my new project. Working on a !947 Panel Truck which has been updated with modern drivetrain and 12 volt system. Unit would have been a little easier to install if came with instructions for setting the float. Happy with unit and the price.

Would Recommend

I would probably not buy this product again.

3.0

9 months ago

Red tractor

Mississippi

Verified

I would probably buy a sending unit with a ring that slides up and down the tube if I had it to do over. I believe it would be an easier and more accurate installation. But overall satisfied.

Would Not Recommend

Yes

5.0

10 months ago

Anglia

Las Vegas

Verified

Worked great

Would Recommend

Great product, great price

5.0

a year ago

Jake

Deloit,iowa

Verified

Would of been better if it came with instructions on how to adjust properly

Would Recommend

I would buy this product again

5.0

a year ago

Mechanic

San Antonio Texas

Verified

The sender is a good fit and went on with little effort. I would definitely recommend it

Would Recommend

Great customer service, very patient and very professional.

5.0

2 years ago

Pumpkin Cars

Egg Harbor Twp., New Jersey

Verified

Part was perfect. Shipping was quick and on-time. Representative was very pleasant and very precise. Thank you.

Would Recommend

Load More Reviews

Showing 10 of 36 reviews

Questions & Answers

11 Questions • 15 Answers

Will this sender work with a positive ground, preferably 6 volt positive ground?

by Rob

• 6 years ago

1 answer

View Answer

Will this sending unit work on a plastic fuel cell?

by Mark

• 7 years ago

1 answer

View Answer

Is this sender universal for 6 volt and 12 volt systems?

by L.W.

• 8 years ago

4 answers

View Answers

Is that sending unit will fit on a 1952 chevy sedan tank?

by Alexis

• 8 years ago

2 answers

View Answers

Can I use this as a side mount? Thinking of mounting on the side of a beer keg for fuel tank (the side actually being the top) but the keg will be laying on its side

by Wes

• 9 years ago

2 answers

View Answers

Is there a natural way to fit this into your aluminium cylindrical tanks? Thanks.

by Joe B

• 9 years ago

1 answer

View Answer

I want to replace my non-working sending unit in my 1988 Wheel Horse Tractor. it is the 33-240 ohm type - my question is what is the spacing on the holes in the cap? I need to make sure that the screw pattern is the same as I cannot alter the setting - has an ABS tank with a metal flange. I believe it will work if the pattern is the same...thanks.

by Jared

• 10 years ago

1 answer

View Answer

Are there any 33Ω to 240Ω fuel senders that will fit into the stock 1965-thru-1968 Mustang fuel tanks (to replace the 10Ω-to-74Ω Ford)? Mounting holes in most flanges are a problem, and also need 3/8" fuel outlet. Thanks!

by BitterOldMan

• 11 years ago

1 answer

View Answer

Dumb question, but does this sending unit have an inlet for the fuel line? I can't tell from the pictures? If so, what size?

by Gigemags05

• 11 years ago

1 answer

View Answer

My original sending unit was a rear swing, not right or left. Can I use it in this fashion? I will be using a 6 bolt to 5 bolt adapter for early Ford tanks. Will I be able to orient the sender to the rear like it was factory on my car, or will I need to go right or left?

by ford84stepside

• 12 years ago

1 answer

View Answer

Load More Questions

10 of 11 questions shown

Customer Impersonation Script