|
#91012521
$159.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, 1.60" Overall Height, 1.50" Neck I.D.
| MFG. Part # | 91012521 |
| Brand | Speedway Motors |
| Neck I.D. | 1.50" |
| Material Type | Aluminum |
| Finish | Polished |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyAs featured on Classic Truck’s Week to Wicked. Watch the transformation here!
Polished billet aluminum pop-up flush mount gas cap is 2-1/2" O.D., 1.600" tall, and works with a 1-1/2" hose.
The Pop-Up gas cap, 910-12521, does not have a vent hole. Some air might get past the threads that hold the cap on, but there is no dedicated venting passage.
Charts
910-12521 Dimensions (PDF)
Guides & Documents
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 91012521 |
| Brand | Speedway Motors |
| Neck I.D. | 1.50" |
| Material Type | Aluminum |
| Finish | Polished |
| GENERAL | |
| Overall Height | 1.60" |
| Outside Diameter | 2.50" |
| Sold in Quantity | Each |
4.5
23 Reviews
Customers appreciate this product for its excellent build quality, aesthetic appeal, and practical use particularly for bed fill gas tanks. Many recommend it for vintage Chevy trucks, praising its easy installation and functionality on various models. Its clean, finished appearance and pop-up feature offers a sleek yet convenient look. However, some customers noted issues with opening the cap, suggesting a need for improved design. A few users wished for more durability and added enhancements such as a lock mechanism, and improved threading. Despite these minor setbacks, the majority expressed satisfaction and approval, often opting to repurchase.
4.5
23 reviews
5
16
4
4
3
2
2
1
1
0
Most Liked Positive Review
4.0
Excellent design, average execution
The design is great, although you might need sticky fingers in order to get the button to rotate, thereby getting the cap open. My gripe is with the sub-par machining on the threads. Be prepared to knock some of the edge off the threads and add some wax as a lubricant in order for proper use. For $100+, this shouldn't be necessary. It would also be a nice touch to have an o-ring at the seal. The cap is non-vented.
Most Liked Negative Review
2.0
Not as pictured
Could have been made better picture should be updated to show the actual cap. The steel roll pin on the cap cuts into the aluminum cap so I don't see it lasting long.
Filter by Ratings
Nice finish on cap assembly
5.0
9 months ago
Greg
Stanwood , Michigan
Verified
Cap looks great...it has a twist to pop up and unscrew from base assembly. Tube size for fitting was a bit smaller than expected but I will make it work...it may give me better mounting placement being smaller...
Would Recommend
Fantastic quality
5.0
a year ago
Jumpingranger
Lincoln ne
Verified
Great price for some solid machine work. This cap works perfectly for my build
Would Recommend
Pop up gas filler
5.0
a year ago
Zeke
Vista
Verified
I havew a turtle deck on my t bucket and a gas cap and my trunk lid would hit it. This solved that problem
Would Recommend
Very nice set up for bed fill gas tanks
5.0
3 years ago
Roscoe
Alabama
Verified
This is perfect for bed fill gas tanks.
Would Recommend
I would recommend these to anyone. Great look and price.
5.0
4 years ago
Bill
Penryn Ca.
Verified
They look great on my 55 Chevy Truck. I can fill up on either side.
Would Recommend
Nine Product
5.0
5 years ago
George
Raleigh NC
Verified
Very nice gas filler neck. Very well made.
Would Recommend
pop up
5.0
5 years ago
66 C10
Mobile, AL
Verified
perfect for in truck bed
Would Recommend
Was as described and works well.
5.0
5 years ago
58Chevy
Tampa, Fl
Verified
Works on fender of 58 chevy truck for relocated gas tank.
Would Recommend
Looks great
4.0
5 years ago
34 roadster
Australia
Verified
Quality looks good just what I needed,
Would Recommend
Open/close challenges
3.0
6 years ago
Goldcar
Eureka Springs, AR
Verified
The center has to be pushed in and turned to allow the cap to pop up, then it can be unscrewed. Reverse the process to close just as difficult.
Would Recommend
Showing 10 of 23 reviews
6 Questions • 7 Answers
Can I leave cap popped up?
by Billy
• 7 years ago
1 answer
View Answer
Will it work with a 2" filler hose? If not do you have something similar that will?
by monti
• 9 years ago
1 answer
View Answer
If my fuel cell is vented or has a breather on the top of the cell is it necessary to have a vented cap gas fill?
by Joshua
• 10 years ago
1 answer
View Answer
Hope to hear from you soon I need to know the part that is outside the car the diameter. I just have a small area that is flat....... I hope you will e-mail the answer to my question I would like to buy something like this or this one.......
by Clarkie
• 12 years ago
2 answers
View Answers
You list two tank vents as rollover protection, will these give the proper venting the tank may need?
by Vancooper
• 13 years ago
1 answer
View Answer
so if this product doesnt have a vent and some air might get past the threads, what will this cause/ do?
by
• 15 years ago
1 answer
View Answer
6 of 6 questions shown
