-18%
-18%
|
#910300
$93.99
/each
In Stock
$115.00
Save $21.01
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, Single Joint Universal Joint Style
| Universal Joint Style | Single Joint |
| End #1 | 3/4" DD |
| End #2 | 3/4" DD |
| Shaft Diameter | 0.75" |
| Spline Count | No splines |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyThese polished stainless steel steering U-joints look great and use a pinch bolt on each end for easy installation.
This particular steering universal joint is made to fit 3/4"DD shafting on both sides. Both sides incorporate the pinch bolt design.
Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.NOTE: These u-joints contain a safety feature that requires the DD steering shaft to be notched for pinch bolt clearance. Once notched, the pinch bolt MUST be torqued to 45 ft/lbs to ensure a tight fit.
Application
When purchasing U-Joints, 3 easy steps will help ensure that they will be correct for your application.
STEP 1
Be sure to measure the diameter of the shaft and count the number of splines on the shaft. Some shafts have a blank spot ground on one side. To get the correct number of splines, use a flat edge and cover the blank half of the shaft through the diameter and count the splines on the other half. Multiply that number by 2, thus giving you the total number of splines on the full circumference of the shaft.
STEP 2
Choose which shaft type best suits your application: 3/4" weld on, 3/4" DD or 1" DD.
STEP 3
With these two pieces of information at hand, refer to our chart to find the appropriate part number of the ujoint for your specific application.
Guides & Documents
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 8050300 |
| Brand | UniSteer |
| Universal Joint Style | Single Joint |
| End #1 | 3/4" DD |
| End #2 | 3/4" DD |
| Shaft Diameter | 0.75" |
| Spline Count | No splines |
| GENERAL | |
| Spline End | No Splines |
| Overall Length | 3.75" |
| Outside Diameter | 1.89" |
| Max Operating Angle | 38 ° |
| Set Screw Included | Yes |
| Material Type | Stainless Steel |
| Finish | Polished |
| Sold in Quantity | Each |
4.2
26 Reviews
Customers acknowledge the high quality and good finish of our U-Joint product, which is consistently praised for its functionality and sturdy build. Some reviews highlight the product's fantastic fit and its replaceability as significant pros. Despite being bulkier than other brands, users find it works well and offers added safety due to the need for shaft notching where the pinch bolt goes. However, a few customers found the U-Joint to be a bit loose, thus requiring additional tightening. Overall, customers expressed satisfaction with its performance, quality, and relative ease of installation.
4.2
26 reviews
5
18
4
2
3
2
2
1
1
3
Most Liked Positive Review
5.0
Top quality U Joint. Beautiful finish.
This joint connection allows you to precisely cut an groove your DD shaft to exactly fit the configuration of your vehicle. Watch the length of the shaft protruding through the u joint end to prevent jamming the swivel joints. I grooved the shaft with my bench grinder to set the locking screw. Everything fit together like a Swiss watch.
Most Liked Negative Review
1.0
Loose
These u-joints are extremely loose fitting to the D-D shaft. You have to tighten the pinch bolts WAY over torqued and even then they will not tighten on the shaft. One of the three u-joints that I purchased did almost tighten on the shaft after torqueing the pinch bolt over twice the recommended torque specification. I will keep them for future builds only for mock-up purposes but there is no way I would use unisteer u-joints in the future. By the way, I am a professional builder so I do know what I'm talking about.
Filter by Ratings
Love this product!
5.0
3 months ago
58 Apache
Memphis,TN
Verified
It looks great and works perfectly.
i would buy this product again
5.0
11 months ago
bubba
illinois
Verified
used this to connect steering wheel column to steering box, easy connection, works great
Would Recommend
It's ok, overpriced but worked.
3.0
2 years ago
Baron
Pacific NW
Verified
Found I had a better quality joint after I installed this one, didn't want to disassemble it to return it. Overpriced and the threads are cut off so the pinch bolt stripped out and had to buy another one, it was so mangled that I couldn't even tell it was metric. Had to call the manufacturer to get the thread pitch and they're not the friendliest of people. Wouldn't buy again.
Would Not Recommend
needed to complete connection
5.0
4 years ago
Horses and hot rods ranch
Argyle NY
Verified
could not get straight shot from column to steering rack, had to order hiem joint and u joint to bring shaft out away from headers. this joint was a little bulkier than the other brand but worked out nicely. also had to notch my shaft where the pinch bolt went through which feels safer than a locknut to me. may not work in a tight clearance area for some because this is a little beefier than other brands.
Would Recommend
Yes great product
5.0
4 years ago
Mike
Stoney Creek Ontario Canada
Verified
Would buy again
Would Recommend
Top quality U Joint. Beautiful finish.
5.0
5 years ago
Gator
Coquille, Oregon
This joint connection allows you to precisely cut an groove your DD shaft to exactly fit the configuration of your vehicle. Watch the length of the shaft protruding through the u joint end to prevent jamming the swivel joints. I grooved the shaft with my bench grinder to set the locking screw. Everything fit together like a Swiss watch.
Would Recommend
Steering coupling
5.0
5 years ago
Jim
SC
Verified
Worked well
Would Recommend
I would buy this again.
4.0
6 years ago
Allan
Cortland Ohio
Verified
I am using alot of speedway parts on my 1950 chevy suburban.
Would Recommend
Works great
5.0
6 years ago
Mudlife
Martinsville IN
Verified
Works as it should and is well built
Would Recommend
DD joint
5.0
6 years ago
Michaeld5z
Knoxville IA
Verified
Limited fit issues and works great!
Would Recommend
Showing 10 of 26 reviews
1 Question • 2 Answers
What is the bolt size? The bolts that come with the u- joint are regular steel and are rusting. Also, on one of the reviews there was a complaint about the clamping, I have yet to REALLY tighten but can see where there may be an issue. Any recommendations? Thanks!!!
by Johnniz
• 13 years ago
2 answers
View Answers
1 of 1 questions shown
