|
#91032928
$94.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, 1 Groove Count, 5.00" Outside Diameter
| MFG. Part # | 8020630 |
| Groove Count | 1 |
| Outside Diameter | 5.00" |
| Material Type | Aluminum |
| Finish | Polished |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyPolished aluminum V-belt pulley with a hole size of .660" (16.764mm) for use with Low Flow & High Flow GM Type II TC steering pumps with a 17mm shaft:
4-15/16" O.D.,
3/8" offset to rear, .813" hub depth
Specs
| KEY SPECS | |
|---|---|
| MFG. Part # | 8020630 |
| Brand | UniSteer |
| Groove Count | 1 |
| Outside Diameter | 5.00" |
| Material Type | Aluminum |
| Finish | Polished |
| GENERAL | |
| Overall Thickness | 1.14" |
| Belt Type | V-Belt |
| Inside Diameter | .66" |
| Offset | .69" |
| Belt Width | .38" |
| Sold in Quantity | Each |
| Notes | While sitting on bench and measuring outwards it is 1 1/8 to outside at shaft hole. |
4.6
12 Reviews
Customers have praised the product for its great fit, excellent quality, and good finish. Many have complimented its practicality for specific setups such as the 64 Chevelle and hydroboost conversions. Despite minor design limitations in terms of repositioning and interaction with certain pump housings, the superior quality and functionality of the pulley are confirmed by users. Some suggest inclusion of a self-locking nut for improved usability. The pulley is particularly commended for its well-made, polished appearance, and confirmed to be a great value when compared to other similar products.
4.6
12 reviews
5
9
4
2
3
0
2
1
1
0
Most Liked Positive Review
4.0
Excellent product
The part looks and fits good. However, it needs to have a self locking nut included. I had to purchase a bag of them just to get one. Otherwise the part is great!
Most Liked Negative Review
2.0
Poor design
#1 Once installed there is no way to remove or reposition the pulley # 2 if you use this with a GM type 2 pump you cannot install it flush with the end of the shaft as normal or it will interfere with the pump housing. #3 There is nothing included instruction wise to indicate this @#$%^&* There are other polished pulleys that do not have the above problems
Filter by Ratings
I would buy this product again...
5.0
a year ago
JD 62
Newnan, GA.
Verified
Fit and finish was great, attached to power steering pump quick and easy. Great looks as well.
Would Recommend
Yes it is great
5.0
6 years ago
Ron
Lancaster, SC
Verified
great pulley
Would Recommend
Great fit on new pump on 64 chevelle
5.0
7 years ago
Hollywood Les smith
Woodhull raceway Woodhull ny
Verified
Used on 64 chevelle stockcar with speedway block mount
Would Recommend
Poor design
2.0
7 years ago
TJP
Omaha
Verified
#1 Once installed there is no way to remove or reposition the pulley # 2 if you use this with a GM type 2 pump you cannot install it flush with the end of the shaft as normal or it will interfere with the pump housing. #3 There is nothing included instruction wise to indicate this @#$%^&* There are other polished pulleys that do not have the above problems
Would Not Recommend
Good quality parts
5.0
8 years ago
Mike
Goshen Ohio
Verified
Just the right part for my set up
Would Recommend
Great polished pulley
5.0
11 years ago
Ronnie
Omaha NE
Verified
Great polish, great fit, great product
Would Recommend
Good Stuff
4.0
11 years ago
Lftracing
Denton MD
Verified
Product came as described. I was not able to use as intended, for a hydroboost conversion with a SWP. However I would not hesitate to use it for another project.
Nice pulley
5.0
11 years ago
Hardly Davidson
Lake Havasu City, Arizona
Verified
This pulley is well made! Nice finish! I actually reversed it on my application (Rat Rod) as I didn't want the fancy look.
Would Recommend
good finish quality
5.0
11 years ago
seniorman
portland or
Verified
Very good quality and good finish. Tight fit run out great and also received a day early.
Would Recommend
Excellent product
4.0
12 years ago
jmjwalke
Vista California
Verified
The part looks and fits good. However, it needs to have a self locking nut included. I had to purchase a bag of them just to get one. Otherwise the part is great!
Would Recommend
Showing 10 of 12 reviews
3 Questions • 3 Answers
Unisteer 8020630 Polished V-Belt Pulley for Aluminum Pumps. Will this pulley work on Unisteer Power Steering Pumps 8060300 ???
by Cecil
• 8 years ago
1 answer
View Answer
I bought this pulley and the ford low volume pump from speedway. What bolt is used with the pulley to the shaft? I did not receive one with either of theses parts.
by JB
• 9 years ago
1 answer
View Answer
Is this a single or double grove pully? will it fit 80s stile GM ps pump I need a double grove pully for my BB VETTE max outter dia 4.5 inches. Thanks Ron
by VETTEMAN
• 11 years ago
1 answer
View Answer
3 of 3 questions shown
