UniSteer 8001590 Rack and Pinion

Rack and Pinion - Manual - with Shaft Kit - 1963-67 Corvette

• Both Unisteer’s Power and Manual Rack kits utilize center take off style rear steer rack & pinions with a ball center which matches the original center link for these Vettes.
• Geometrically correct – No bump Steer! The racks come on one piece mounting brackets which
• bolt on using the same factory holes for the steering box and idler arm.
• These kits clear the Z-Bar and 4 Speed Linkage with no problem. The kits have worked on Small Block motor cars with stock manifolds
• short or long tube headers.
• Pump Kit and Shaft kits are not included in the basic rack kits due to differences in the year breakdown for these Vettes.
• We do recommend trying our pump and shaft kit but that is up to you! Shaft kits consist of two U-joints and a section of shaft. This has usually been enough to complete the linkage.
• Pump kits come with the small block mounting brackets that mount the pump to the cylinder head. Single V-Groove Pulley is standard
• but we do have the option of serpentine pulleys as well.

Improved Steering and Handling? Bolt in kit? Yes and Yes. Change the driving experience of your Vette with our bolt in steering system available with either power or manual rack and pinions. Make your Stingray drive like a ’07 instead of a ’67.