UniSteer 8001050-01 Rack and Pinion, Manual, 1960-65 Falcon/Comet

Rack and Pinion - Manual - 1960-65 Falcon/Comet

• One of UniSteer's own builds
• we used a center take off style rack mounted to a one piece U-shapped bracket that bolts up to the back side of your stock motor / frame mounts.
• Slide the bracket up into place and install with our longer bolts.
• Installs on these cars have been done with stock manifolds or Hooker Super Comp Headers. Other headers may work with modification. Tri-Y style headers do NOT work.
• This kit works with V8 motors and floor shifters. This kit will not work with the factory column shifter
• but it will work with an aftermarket column shifter.
• If your Falcon or Comet had inline 6
• the spindles have a different taper
• just let us know and we can get you a different set of outers.
• Note: We have run into cars with Granada spindles
• and this kit will NOT work with those spindles.

Who hates the way their Falcon/Comet steer? Everybody! You can fix that with one of our bolt on complete rack & pinion kits.