-12%

Tanks Inc 34PSN 1933-1934 Ford Car Poly Gas Tank

-12%

Tanks Inc 34PSN 1933-1934 Ford Car Poly Gas Tank
Tanks

|

#91076063

Tanks Inc 34PSN 1933-1934 Ford Car Poly Gas Tank

  • Designed to fit the 1933-1934 Ford cars
  • Features a one-piece, heavy wall polyethylene construction
  • Exclusive baffle-tunnel is designed to protect your sending unit
See More

Type:

Polyethylene

Steel

$301.99

/each

Factory Shipped

$345.00

Save $43.01


Quantity

Need Help? Call to Order

Add to a list

Share

Select a vehicle to verify Fitment

Select Vehicle

Product Summary

33-34 Ford, Custom Replacement Fuel Tank Style, Natural

  • Designed to fit the 1933-1934 Ford cars
  • Features a one-piece, heavy wall polyethylene construction
  • Exclusive baffle-tunnel is designed to protect your sending unit
  • A unique design minimizes sloshing and connect the top of the tank to the bottom
  • Includes a bolt-on steel neck which can be painted to match your car
See more details

Key Specs

MFG. Part #34PSN
Fuel Tank StyleCustom Replacement
Fuel System TypeEFI | Carb
Capacity16 gallons
Material TypePolyethylene
See more specs

Need To Know

Need help?

855.313.9176
View the Help Center

Quick and Easy Returns

Return Policy

Tanks 34PSN Details

This 1933-1934 Ford car tank features a one-piece, heavy wall polyethylene construction with exclusive baffle-tunnel to protect your sending unit, minimize sloshing and connect the top of the tank to the bottom to form a Strong-No-Sag unit.

This tank also features: top mounted pick-up tube, internal baffling, roll over vent valve, sender mount for all aftermarket senders, leak tested, and billet cap with o-ring seal.

Bolt-on steel neck allows painting to match your car. Threaded blind metal inserts. 16 gallon capacity with billet cap.

42-1/4" x 14-1/2" x 10-1/4"

Charts

Warranty Information

Click for details

Speedway Motors cannot facilitate the return of defective Tanks Inc.’s products as they have requested to handle these directly with the consumer. For defective product support and Return Authorization, please contact Tanks Inc. at (319) 465-3522 or (877)

CARB Warning

For race/ off road use only

Emissions warning: this part only legal for sale or use in California for racing (competition) vehicles which may never be used, registered, or licensed for use upon a public highway. Any other use renders the vehicle tampered and not legal for use on California public highways (any public street or roadway, public dirt road, public park, or publicly maintained right of way open to the use of the public for vehicular travel). Violations subject to $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and the laws of all other states with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine.
CA Prop 65
CARB warning

Tanks 34PSN Specifications

KEY SPECS
MFG. Part #34PSN
BrandTanks
Fuel Tank StyleCustom Replacement
Fuel System TypeEFI | Carb
Capacity16 gallons
Material TypePolyethylene
FinishNatural
ColorBlack
Sending Unit IncludedNo
Fuel Pump IncludedNo
Tank Straps IncludedNo
Overall Length42.25"
Overall Width10.25"
Overall Height14.5"
Fuel Capacity Range15.00-19.99 Gallons
GENERAL
Sold in QuantityEach
Fuel TypeGasoline
BaffledYes
Filler Neck IncludedYes

Ratings & Reviews

4.2

6 Reviews

Overall Assessment

This product is a gas tank for older model cars like the 1934 Ford Tudor. Noted for its ease of install, the tank increases fuel capacity significantly, which is a big plus for customers. However, some noted that the gas controls can be unreliable during tight turns if the tank isn't full, causing the gas gauge to swing. Moreover, discrepancies in the sending unit mounting pattern have resulted in necessary modifications for some. Despite these issues, customers praised the tank's fitting and the inclusion of all necessary hardware, which greatly facilitated the installation process. Many recognized it as a vital upgrade for their vehicles.

Write A Review

4.2

6 reviews

5

3

4

1

3

2

2

0

1

0

Filter by Ratings

I would buy it again

5.0

2 months ago

Plucky

Parkersburg pa

Verified

Great fit

Would Recommend

I would buy it for my other project.

5.0

4 months ago

Plucky

Parkersburg Pa

Verified

Great fit and easy to install.thanks

Would Recommend

not very happy!

3.0

8 years ago

rvintage

Brazoria, tx.

Verified

Purchased the above gas tank for my 1934 Ford Tudor. Install was good. Problem is the baffle does not control the gas in the tank. Make a tight left turn and engine dies do the lack of fuel. Gas gauge swings to empty. Tank has over 10 gals. It appears to make it work properly a full gas tank is needed at all times. not very satisfactory. Lot of questions, need answers. RGrimes

Not installed yet,

4.0

8 years ago

vintage Grimes

Brazoria, Tx.

Verified

Rec'd as scheduled and all parts were there. Installed all parts including the sender I rec'd earlier with my new gauges. Will let you know how the tank installation turns out, once it is done. Looking forward to completion and the added fuel capacity. The current 11 gal. tank does not get you very far.

Would Recommend

Sending unit mounting pattern did not math

3.0

10 years ago

sauterindy

Indianapolis

Verified

I got this tank to use in a 30 model A that was channeled so non standard mounting application, like the tank but the stewart warner fuel float assy (speedway part 665385B) did not match up to the pattern on the tank. Had to drill out holes on the float mechanism and elongate several to make fit. Not sure if tank or float at fault.

Would Recommend

This worked very well and gave more gas

5.0

11 years ago

RocknRay

Mesa, AZ, USA

Verified

Tank fits perfect into my stock 1934 frame and bolted up. all hard ware and new sending unit fit very well.. I also wrapped the exhaust pipes with heat tape due to how close they were to the tank. This was a long awaited project that needed to be completed. THX. Ray

Would Recommend

Showing 6 of 6 reviews

Questions & Answers

5 Questions • 5 Answers

this poly tank is 6" deeper than the orignal steel. Will a 33 ford roadster handle the extra depth? I would like extra capacity

by Roy Ashley

• 9 years ago

1 answer

View Answer

I have a 3.5L Ecoboost in my 34 ford and looking for a compatible fuel pump to go with this tank. Any recommendations?

by Chris

• 9 years ago

1 answer

View Answer

Do you have an in-tank fuel pump for this tank? Using for a flat head hot rod application and current external fuel pump I have need to be lower than tank. It will be lower but pulling from the top of the tank and I am not sure that will work ok (to effect initial priming of pump).

by none

• 10 years ago

1 answer

View Answer

Do you have a sending unit that will work with this tank?

by

• 14 years ago

1 answer

View Answer

what are the dimentions of this tank? thank you

by

• 15 years ago

1 answer

View Answer

5 of 5 questions shown

Fitment

            Customer Impersonation Script