Tanks Inc 32P 1932 Ford Polyethylene Gas Tank
Tanks Inc 32P 1932 Ford Polyethylene Gas Tank
Tanks

|

#91076062

Tanks Inc 32P 1932 Ford Polyethylene Gas Tank

  • Designed to fit various 1932 Ford's
  • Features a 14 gallon capacity and a top mounted pickup tube
  • Tank is made from polyethylene plastic and is pre tested before it gets shipped out
See More

Type:

Polyethylene / Extra Capacity

Stainless Steel / Stock CapacitySteel / Extra CapacitySteel / Stock Capacity

$424.99

/each

In Stock

$425.00

Save $0.01

Order soon, only 2 left in stock!


Quantity

Need Help? Call to Order

Add to a list

Share

Select a vehicle to verify Fitment

Select Vehicle

Product Summary

1932 Ford, EFI Conversion Fuel Tank Style, Polyethylene

  • Designed to fit various 1932 Ford's
  • Features a 14 gallon capacity and a top mounted pickup tube
  • Tank is made from polyethylene plastic and is pre tested before it gets shipped out
  • Comes with a fiberglass cover and a bolt-on steel neck with a billet cap
  • Dimensions measure 35-7/8" long, 13" wide and 10" high
See more details

Key Specs

MFG. Part #32P
Fuel Tank StyleEFI Conversion
Fuel System TypeCarbureted
Capacity14 gallons
Material TypePolyethylene
See more specs

Need To Know

Need help?

855.313.9176
View the Help Center

Quick and Easy Returns

Return Policy

Tanks 32P Details

This inexpensive, 14 gallon capacity poly tank comes with a fiberglass cover and a bolt-on steel neck with a billet cap. The neck and cover can be painted to match your car for a total original look. (The bottom of tank will be a contrasting black).

  • High-Density Seamless Polyethylene - Heavy Wall Construction
  • Bolts Into Frame, the fiberglass cover bolts to the top of the rails and the tank bolts to the bottom of the frame rails
  • Patented Baffle - Tunnel - Minimizes Sloshing
  • Top Mounted Pickup Tube & Vent
  • Bolt-on Steel Neck and Billet Cap
  • Paintable Fiberglass Cover and Filler Neck
    (Does Not Allow In-Tank Fuel Injection Pump Installation)
  • 14 Gallon Capacity - 1-7/8" Deeper Than Stock
  • 35-7/8" x 13" x 10"
  • Accepts All 5-Hole Senders - VDO, SW, Classic, etc.
  • Leak Tested
  • Remote Rollover Vent Valve


This tank also features a top mounted pick-up tube, internal baffling, roll over vent valve, sender mount for all aftermarket senders, and has been leak tested.

Note:  Frame/Cross bar shown in photo are for installation/photo purposes only and are not included with this tank.

Application

Will not work with frame rails that are boxed beyond the crossmember.

Specs


Warranty Information

Click for details

Speedway Motors cannot facilitate the return of defective Tanks Inc.’s products as they have requested to handle these directly with the consumer. For defective product support and Return Authorization, please contact Tanks Inc. at (319) 465-3522 or (877)

CARB Warning

For race/ off road use only

Emissions warning: this part only legal for sale or use in California for racing (competition) vehicles which may never be used, registered, or licensed for use upon a public highway. Any other use renders the vehicle tampered and not legal for use on California public highways (any public street or roadway, public dirt road, public park, or publicly maintained right of way open to the use of the public for vehicular travel). Violations subject to $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and the laws of all other states with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine.
CA Prop 65
CARB warning

Tanks 32P Specifications

KEY SPECS
MFG. Part #32P
BrandTanks
Fuel Tank StyleEFI Conversion
Fuel System TypeCarbureted
Capacity14 gallons
Material TypePolyethylene
FinishNatural
ColorBlack
Sending Unit IncludedNo
Fuel Pump IncludedNo
Tank Straps IncludedNo
Overall Length35.875"
Overall Width13"
Overall Height10"
Fuel Capacity Range10.00-14.99 Gallons
GENERAL
Sold in QuantityKit
Outlet Fitting1/4" NPT

Ratings & Reviews

4.7

6 Reviews

Overall Assessment

Customers appreciate the product for its quality and completeness, noting everything you need is supplied, excluding the sending unit aligning with separate gauge purchases. Some users experienced a challenging fit which required modification, but overall, most customers praise the nice fit and aesthetics of the Speedway fuel tank, providing an edge over competitor tanks. No issues related to material quality or safety were raised, affirming the product's reliability and user satisfaction.

Write A Review

4.7

6 reviews

5

5

4

0

3

1

2

0

1

0

Filter by Ratings

I would buy this again!

5.0

a month ago

Nick

Woodstown NJ

Verified

This Tank Fit Great, I am very Happy with it.

Would Recommend

I would buy this again!

5.0

a month ago

Nick

Woodstown NJ

Verified

Fit was Great! The cover is well made and EZ to fit and paint

Would Recommend

Was not size that was shown online.

5.0

a year ago

Pat

Ozark, Al

Verified

I had to return as it was larger than was shown in online catalog.

Would Not Recommend

Nice tank... Thanks. Speedway....

5.0

3 years ago

32 Ford

Pennsylvania

Verified

Nice tank.. No problems.. Everything you need is supplied with the tank except the sending unit which usually comes with the gauges you buy. A++++

Would Recommend

Not to happy withthis

3.0

10 years ago

Carl

Dayton , ohio

Verified

When I received it parts was missing out of box , but called speedway motors and they had the parts sent to me right away , cons , it takes a lot of work and mods to get the cover to fit right ,

Would Not Recommend

32 ford fuel tank

5.0

10 years ago

Don C

Port Orange, Fl.

Verified

even though I'm not complete on my build the tank has a nice fit and look

Would Recommend

Showing 6 of 6 reviews

Questions & Answers

3 Questions • 3 Answers

What size is the pickup? I would like to get a tank with a 1/2" pickup, or at least a 3/8"

by Rich32

• 11 years ago

1 answer

View Answer

Frame mounting Re; 91076062 32P poly tank - Your notes say the cover bolts to the top of the frame and the tank to the bottom of the frame rails but the Tanksinc site says it bolts to the frame like the original (Top of the chassis rails?) Which is correct (this is very important to me as i live in the UK and cannot send it back to you if its wrong)? Regards Ian

by Flutt

• 12 years ago

1 answer

View Answer

What are the dimensions of this tank?

by Jeff

• 14 years ago

1 answer

View Answer

3 of 3 questions shown

Fitment

          Customer Impersonation Script