|
#91034342
$47.99
/pair
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, 1.275" Bushing Diameter
Need help?
855.313.9176Quick and Easy Returns
Return PolicyWe found that a lot of hot rod Mustang II cross members utilize mount spacing for Mustang II rack and pinions that mount via a center to center measurement of 16". Most aftermarket Mustang II rack and pinions are manufactured for a 15.5" center to center mount.
This bushing set allows you to install an aftermarket Mustang II style rack and pinion assembly on nearly any of the many Mustang II style cross members found in the hot rod world today.
If you are upgrading to a new power rack or even just replacing a worn out one - these bushings are a simple solution, to compliment any level of install or upgrade - saving you valuable time and money!
NOTE: These bushings are not designed to raise or lower the rack & pinion.
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 91034342 |
| Brand | Speedway Motors |
| GENERAL | |
| Bushing Diameter | 1.275" |
| Bushing Material | Delrin |
| Hole Diameter | .760" |
| Hardware Included | Yes |
| Sold in Quantity | Kit |
4.6
47 Reviews
Customers confirm the product's quality and practicality, appreciating that it fits as indicated, saving them time and effort. They describe it as a great replacement part, making installation a quick and relatively easy process. Adjustments and minor modifications are needed in some situations, but the product solves alignment issues effectively. The majority of users would buy again, signifying satisfaction. Although some required additional parts, they still recommended the product for its quality and functionality. It enhanced previous installations significantly for many, even though a few found the off-set slightly inadequate for certain racks. Overall, the product is acknowledged as an excellent problem solver, surpassing competitor's offerings by offering tangible, beneficial features and superior performance.
4.6
47 reviews
5
39
4
3
3
3
2
0
1
2
Most Liked Positive Review
4.0
The offset bushings saved me from having to buy a 16" rack
The steering rack that came with my kit was for a 15 1/2" mount crossmember, Mine is a 16" n center stock rack. I wasn't aware of the difference when I made the purchase. I was thrilled to find the offset bushing kit so I could use the rack with my stock crossmember. I still had to hog out the crossmember mounting holes about 1/16" on the inside of each hole. I didn't like having to do that but had little choice other than buying a 16" on center rack, but I would have been stuck with a 15 1/2" rack. Overall pleased but it took extra time and I didn't like having to hog out the holes.
Most Liked Negative Review
3.0
Kinda fit...
It's meant to make a t-bird 15.5" rack fit on the older 16" M2. My M2 crossmember had the rack bolts welded in place. They were spot on 16" apart. The t-bird rack with the "standard" 15.5" bushings was spot on at 15.5". When I installed these bushings I could only get 15.875" on center. Even with some pressure, I couldn't get 16". I tried 3 different set of bushings and could never get 16". I ended up having to cut and drill out one of my welded nuts to get it to work.
Filter by Ratings
Kinda fit...
3.0
a month ago
Stew
WA
Verified
It's meant to make a t-bird 15.5" rack fit on the older 16" M2. My M2 crossmember had the rack bolts welded in place. They were spot on 16" apart. The t-bird rack with the "standard" 15.5" bushings was spot on at 15.5". When I installed these bushings I could only get 15.875" on center. Even with some pressure, I couldn't get 16". I tried 3 different set of bushings and could never get 16". I ended up having to cut and drill out one of my welded nuts to get it to work.
Would Recommend
Mustang 2 rack needed offset bushings
5.0
3 months ago
DanM
Napa
Verified
My mustang 2 rack needed offset bushings and these were perfect!
Would Recommend
I have purchased a lot of parts for my 396 for my 67 Nova
5.0
5 months ago
Don
Surrey BC Canada
Verified
Off set Bushings fit perfect
Would Recommend
Will not offset your rack mounts 1/2"
1.0
a year ago
F350Bronco
Minneapolis, MN
Verified
The offsets in these bushings are 0.18 NOT 0.25. So you get 0.36 total mount offset NOT the 0.50 you need.
Would Not Recommend
Worked great!!!
5.0
a year ago
Buckchop
Louisiana
Verified
Tbird rack on aftermarket crossmember in a 39 chevy coupe
Would Recommend
Good stuff works as described
5.0
2 years ago
Captain Tom
Jax, Fla
Verified
Makes life easy
Would Recommend
I would buy this again
5.0
2 years ago
Gary
Tucson
Verified
used for rack on 52 Studebaker truck
Would Recommend
Yes
5.0
2 years ago
kid
Washington, Mi.
Verified
Works great, like everything I've bought from Speedwaymotors
Would Recommend
the perfect replacement
5.0
3 years ago
Vinnie
Tampa Fl
Verified
I used it to replace the power Rack and pinion
Would Recommend
Yes, I would buy this part form Speedway again.
5.0
3 years ago
Criag
Hampstead, NC
Verified
It fit right into the space as Speedway indicated and good advice breaking it in.
Would Recommend
Showing 10 of 47 reviews
2 Questions • 4 Answers
I have a manual Mustang II rack which is 16" on center for the mounting holes. I have a '93 mustang which has 15 1/2" on center bolt placement. Will this off set bushing allow me to mount the earlier steering rack? I figure it's just the reverse of what i
by
• 14 years ago
2 answers
View Answers
what is the thread size for the bolts
by fernie
• 15 years ago
2 answers
View Answers
2 of 2 questions shown
