|
#91032294
$76.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, Single Joint Universal Joint Style
| MFG. Part # | 401-51219 |
| Universal Joint Style | Single Joint |
| End #1 | 3/4" DD |
| End #2 | 3/4"-36 Spline |
| Spline Count | 36 |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyAs featured on Classic Truck’s Week to Wicked. Watch the transformation here!
Don't jeopardize your safety with inferior quality Mustang II power rack universal joints. Speedway offers only the finest steering U-joints made by Sweet Manufacturing.
Learn more about u-joints and steering systems by reading our tech article. U-Joint Selection and Design.
Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1". DO NOT interchange these u-joints.
GM Manual, Mustang II Power
3/4"-36 Spline
Application
STEP 1
Be sure to measure the diameter of the shaft and count the number of splines on the shaft. Some shafts have a blank spot ground on one side. To get the correct number of splines, use a flat edge and cover the blank half of the shaft through the diameter and count the splines on the other half. Multiply that number by 2, thus giving you the total number of splines on the full circumference of the shaft.
STEP 2
Choose which shaft type best suits your application: 3/4" weld on, 3/4" DD or 1" DD.
STEP 3
With these two pieces of information at hand, refer to our chart to find the appropriate part number of the ujoint for your specific application.
Guides & Documents
| KEY SPECS | |
|---|---|
| MFG. Part # | 401-51219 |
| Brand | Sweet Manufacturing |
| Universal Joint Style | Single Joint |
| End #1 | 3/4" DD |
| End #2 | 3/4"-36 Spline |
| Spline Count | 36 |
| GENERAL | |
| Spline End | 3/4"-36 |
| Overall Length | 3.75" |
| Outside Diameter | 1.355" |
| Max Operating Angle | 30 ° |
| Set Screw Included | Yes |
| Material Type | Steel |
| Finish | Oxide |
| Color | Black |
| Sold in Quantity | Each |
| Notes | For DD steering shaft. |
4.9
69 Reviews
Customer reviews for this product highlight its remarkable manufacturing quality and excellent fit. Users appreciate its smooth operation and straightforward installation process. The product is commonly recommended for its dependable performance in vehicle customizations, notably in the assembly of steering systems for classic and hot rod vehicles. Despite a single comment on desiring an additional set screw for locking down, users find it to be a well-crafted, compact, and highly practical solution with superior function over competitor products.
4.9
69 reviews
5
59
4
10
3
0
2
0
1
0
Filter by Ratings
I would buy again
5.0
3 months ago
Ed
Santa Rosa
Verified
Great product
Would Recommend
U JOINT
5.0
10 months ago
RHR
SENATOBIA, MS.
Verified
WORKED GREAT TO SET UP OUR STEERING LINKAGE
Would Recommend
I would buy this again
4.0
a year ago
Lars
Missoula montana
Verified
Seems to be well made and strong
Would Recommend
Just right
5.0
a year ago
Lefty
Indiana
Verified
Fit my mustang 2 steering gearbox perfectly.
Would Recommend
this is a great product
5.0
a year ago
Jim
Autryville NC
Verified
the functionally of this item allows my steering whell linkage to work without any difficulties
Would Recommend
Thumbs up
4.0
a year ago
J
MT
Verified
Great product is going to work out perfect. Not like the previous joint that sombody welded to the ¾ dd shaft. Not a good idea.
Would Recommend
Yes
5.0
2 years ago
Bbhf
Ct
Verified
Quality steering part
Would Recommend
Yes I would buy this product Again
5.0
3 years ago
Dale
Windsor, Ontario.
Verified
They sure make a Tight Fit. The Quality in my opinion is the Best. No sloppy joints and Very smooth to turn. Just' Sweet'.
Would Recommend
Yes
5.0
3 years ago
T G
Warrensville N C
Verified
Great service great product.
I would buy this again!
5.0
3 years ago
Scott
Wrenshall mn
Verified
For my rebuild.
Showing 10 of 69 reviews
4 Questions • 7 Answers
Will this 3/4" 36-spline fit the input shaft on a reversed Corvair steering box?
by Mike
• 6 years ago
1 answer
View Answer
I baught 2 of these. And the u joints are starting to go bad and I am trying to find just replace the joints. Do you sell just the u joints? Or know a part number for the joints
by Steve
• 8 years ago
2 answers
View Answers
does this part have lock down screws in both ends for the shafts
by butch
• 11 years ago
1 answer
View Answer
What does DD mean? Sorry for the probably obvious question but what does DD stand for.
by Help2488
• 12 years ago
3 answers
View Answers
4 of 4 questions shown
