|
#91032290
Sweet Mfg Steering U-Joint 9/16 26 Spline to 3/4 DD, Mustang II Manual
- Features needle bearing u-joints
- They have full compliment bearings
- Made of the highest quality for racing
$76.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Product Summary
Universal Fit, Single Joint Universal Joint Style
- Features needle bearing u-joints
- They have full compliment bearings
- Made of the highest quality for racing
- Features Forged Vanadium steel yokes and u-joint
- There is a 3/4 DD on one end and a 9/16"-26 spline on the other
Key Specs
| Universal Joint Style | Single Joint |
| End #1 | 3/4" DD |
| End #2 | 9/16"-26 Spline |
| Shaft Diameter | 0.75" |
| Spline Count | 26 |
Need To Know
Need help?
855.313.9176Quick and Easy Returns
Return PolicySweet Manufacturing 401-51319 Details
Sweet Manufacturing 401-51319 Details
Dont jeopardize your safety with inferior quality steering components. Speedway offers only the finest steering U-joints available. Made by Sweet Manufacturing. These steering universal joints feature forged Vanadium steel yokes and full compliment bearings.
- Full compliment bearings
- Forged Vanadium steel yokes and u-joint
- Highest quality for racing or street
- Features needle bearing u-joints
Note: GM columns measure slightly less than 1" while IDIDIT and Flaming River columns measure a true 1". DO NOT interchange these u-joints.
Item Details
3-3/4" in length. 1-3/16" diameter.Application
STEP 1
Be sure to measure the diameter of the shaft and count the number of splines on the shaft. Some shafts have a blank spot ground on one side. To get the correct number of splines, use a flat edge and cover the blank half of the shaft through the diameter and count the splines on the other half. Multiply that number by 2, thus giving you the total number of splines on the full circumference of the shaft.
STEP 2
Choose which shaft type best suits your application: 3/4" weld on, 3/4" DD or 1" DD.
STEP 3
With these two pieces of information at hand, refer to our chart to find the appropriate part number of the ujoint for your specific application.
Guides & Documents
Sweet Manufacturing 401-51319 Specifications
Sweet Manufacturing 401-51319 Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | 401-51319 |
| Brand | Sweet Manufacturing |
| Universal Joint Style | Single Joint |
| End #1 | 3/4" DD |
| End #2 | 9/16"-26 Spline |
| Shaft Diameter | 0.75" |
| Spline Count | 26 |
| GENERAL | |
| Spline End | 9/16"-26 |
| Overall Length | 3.75" |
| Outside Diameter | 1.355" |
| Max Operating Angle | 30 ° |
| Set Screw Included | Yes |
| Material Type | Steel |
| Finish | Oxide |
| Color | Black |
| Sold in Quantity | Each |
Ratings & Reviews
4.6
31 Reviews
Customers highly recommend our product for its perfect fit and functionality in a variety of steering systems, particularly noted for classic vehicle restoration projects. Users commend the ease of installation, the product's ability to enhance steering smoothness, and the overall heavy-duty build quality. Many repeated purchases underscore trusted reliability. However, a few customers have reported loosely-fitting instances, but the overall consensus praises the product. The product's performance is viewed as superior to others, confirmed by a user who switched from a less reliable brand and noticed significantly improved steering smoothness. Safety and durability are emphasized as key product attributes.
Ratings & Reviews
4.6
31 Reviews
Customers highly recommend our product for its perfect fit and functionality in a variety of steering systems, particularly noted for classic vehicle restoration projects. Users commend the ease of installation, the product's ability to enhance steering smoothness, and the overall heavy-duty build quality. Many repeated purchases underscore trusted reliability. However, a few customers have reported loosely-fitting instances, but the overall consensus praises the product. The product's performance is viewed as superior to others, confirmed by a user who switched from a less reliable brand and noticed significantly improved steering smoothness. Safety and durability are emphasized as key product attributes.
4.6
31 reviews
5
26
4
2
3
1
2
1
1
1
Most Liked Positive Review
4.0
I ordered two u joints. They came in a c
Speedway provides very fast service and as always offers good value for the money. The u joints I ordered were very good quality. I installed them the very next day after I received them. The fit was perfect and the joints are very smooth. I am very satisfied with them and Speedways fast shipping.
Most Liked Negative Review
3.0
correct steering
I bought this part for temporary steering on my project. The splined end fit the splined end of the rack and pinion steering just fine. I had an old piece of double d shaft that didn't fit, so with some adjustment I made it fit.
Filter by Ratings
steering hookup
5.0
5 months ago
Horses and hot rods ranch
Argyle NY
Verified
Used this on a M2 non power steering rack and pinion.
Would Recommend
Sweet steering joint
5.0
a year ago
Capsule
Collins, MS
Verified
USA made and sold 9/16 by 26 spline steering joint. I purchased a cheap foreign made one and it was so fat that it hit the cross member and wouldn't work
Would Recommend
Great product
5.0
a year ago
Zoomer
Tennessee
Easy install and superior quality
Would Recommend
correct steering
3.0
a year ago
BJ
Napa Ca.
Verified
I bought this part for temporary steering on my project. The splined end fit the splined end of the rack and pinion steering just fine. I had an old piece of double d shaft that didn't fit, so with some adjustment I made it fit.
Would Recommend
yes if needed
5.0
3 years ago
tom
Eugene Or
Verified
fixed my loose streering
Would Recommend
If needed
5.0
3 years ago
Darla Satterfield
New Holland Ohio
Verified
Great customer service and support !
I would buy again
5.0
3 years ago
TM
Tyler Tx.
Verified
Works for my 46 Chevy pu project
Would Recommend
Product fit perfect on my truck I would buy it again
5.0
4 years ago
China man
Corpus Christi Texas
Verified
Steering u-joint Fit perfect on my 1951 Ford pick up
Would Recommend
Wrong part in a correctly labeled box that looks returned.
1.0
4 years ago
Irritated customer
Oklahoma
Verified
Cane in a rag of a box that looks about a hundred years old.
Would Not Recommend
I would definitely buy it again
5.0
5 years ago
Sathe
Yankton
Verified
Part worked great
Showing 10 of 31 reviews
Questions & Answers
4 Questions • 4 Answers
Questions & Answers
4 Questions • 4 Answers
will this fit the rack conversion you sell for vega boxes on model a's
by chuck
• 9 years ago
1 answer
View Answer
Is the 3/4" DD exactly 3/4"?
by Ozarkmark
• 13 years ago
1 answer
View Answer
Are these joints weld on or bolt on?
by 1low54
• 13 years ago
1 answer
View Answer
HOW LONG IS THIS JOINT AND HOW BIG AROUND
by Canadain
• 14 years ago
1 answer
View Answer
4 of 4 questions shown
Fitment
Fitment
1974-1978 Ford Mustang II