Street SB Chevy 400 Rotating Assembly, Dish Piston, 5.7 In Rod

These rotating assembly engine rebuild kits are designed for street use and include Keith Black Hypereutectic pistons, Speedway 5140 I-beam rods, main/rod bearings and a Speedway Cast Steel crankshaft. Rings not included. Journals are standard size.

Due to larger journal side radius on this aftermarket crankshaft, you must use Clevite H-series, King bearings (included in kit) or equivalent.

These assemblies will require balancing either by us or your machine shop.

All balancing is done with our state-of-the-art Hines balancer by race mechanics with over 30 years of experience!  A kit purchased with the optional balance job will ship in 24-48 hours.

Kit features:

• Speedway Cast Steel Crankshaft
  • Two-piece rear main
  • 80-60-06 cast steel
• Speedway 5140 I-Beam Connecting Rods
  • Heat treated, shot peened and magnafluxed
  • 5.7 " length
  • Bushed pin
  • 658 grams
  • Set of 8 rods
• KB Hypereutectic Dished Pistons
  • T-5 heat treated aluminum construction
  • 4.000 " bore pistons available in .030, .040, or .060 sizes
  • 4.125 " bore pistons available in .030 or .040 sizes
    

Kit features:

• Speedway Cast Steel Crankshaft
  • Two-piece rear main
  • 80-60-06 cast steel
• Speedway 5140 I-Beam Connecting Rods
  • Heat treated, shot peened and magnafluxed
  • 5.7 " length
  • Bushed pin
  • 658 grams
  • Set of 8 rods
• KB Hypereutectic Dished Pistons
  • T-5 heat treated aluminum construction
  • 4.000 " bore pistons available in .030, .040, or .060 sizes
  • 4.125 " bore pistons available in .030 or .040 sizes