Good value option
Tube measures 1.650" OD, with very minimal profile distortion throughout the bends (Measures 1.635" and 1.665"). Tubing has a very very small weld seam (.005" tall), but this tube is not marketed as DOM so this is expected. The location of the seam is consistently located on the "side" of the bends and not the inside or outside where it could compromise the strength/quality of the bend. No kinking of the tube at the lead-in or lead-out portions of the bend like you see with lower quality "mandrel" bent tubing. The tube is pretty much exactly as the photo shows, with only slightly more noticeable marks from where the clamps hold the tube to form the bends. These marks can be easily be polished out or knocked down with a red scotch brite.
Lost a star for being slightly off advertised dimensions (1.650" instead of 1.625"). Not a problem for me but if you're mixing and matching with other brands you may care or have issues with slip fit parts if they have tight tolerances for 1.625"