Stainless Exhaust Pipe Adapter, 3 Inch Round to 3 Inch Oval

• 3-inch diameter oval exhaust adapter features 3-inch round tubing end
• Allows for creating removable exhaust sections for service needs
• Oval exhaust tubing section is 6.00-inches in length
• Designed to adapt oval exhaust systems to standard round exhaust tubing
• Manufactured from 16ga (.060-inch wall) 304 stainless steel tubing
• Oval exhaust tubing provides increased ground clearance
• Can be clamped or welded to existing or new exhaust tubing
• Oval to round adapters, oval inlet/outlet mufflers, and more available for your build

Oval to Round 3-inch Exhaust Adapter for Custom Oval Exhaust System Creation

Complete application specific exhaust systems are a great DIY option for increased performance and exhaust sound. But what if you’re building something custom (engine, driveline swaps, short bed conversions, etc.) or your ride is simply of the age that direct fit systems aren’t available? Well then, you’re going to be building your own exhaust system. You probably have manifolds or headers already picked out for fitment reasons like an LS swap, but south of the manifold or header exit is often left up a local exhaust shop and their limited product line. Standard round tubing might get the job done but often ends up reducing ground clearance and causing numerous fitment headaches.

The answer is using oval exhaust tube! The oval exhaust tube cross section provides for increased flow while not requiring any more height than most standard exhaust systems. The cross section of the typical oval exhaust pipe means you have additional clearance height wise, perfect for lowered vehicles or vehicles with minimal traditional exhaust routing space. Our oval 3-inch stainless exhaust tubing features a traditional 3-inch round exhaust tube end, providing the perfect solution for connecting to an existing or new round tube exhaust section under your vehicle. Manufactured from 16-gauge (.060-inch wall thickness) 304 stainless steel, this stainless-steel exhaust pipe features a 6.00-inch straight section with no mounting flange (clamps or welding required).

Increased Ground Clearance Without Loss of Exhaust Flow

Mate this oval exhaust to round exhaust pipe adapter section to our other oval exhaust tubing, including straight sections, horizontal and vertical bends, pie cuts, and more to complete your custom oval exhaust build. We also carry 3-inch oval inlet/outlet mufflers, and 3-inch oval to 3-inch round header collector/pipe adapters to aid in building the perfect exhaust for your ride. This oval to round adapter is the perfect solution for when you only need a specific section of your exhaust converted to oval tubing for ground clearance.