Speedway Small Block Chevy Vintage Top-End Kit

Speedway Motors new top end kit has everything you need for your small block Chevy to give it the vintage look.  Aluminum Heads, Aluminum Edelbrock Intake, Chevrolet script valve covers, gaskets, and hardware.

Kit Includes

• (1) Edelbrock 2703 Performer EPS Chevy Intake Manifold
• (2) Speedway Assembled Aluminum Double Hump Cylinder Heads
• (1) Finned Small Block Chevrolet Cast Valve Covers, Pair
• (1) Mr Gasket 6080MRG Super Intake Manifold Bolt Kit
• (1) Speedway Steel Core Valve Cover Gaskets, Pair
• (2) Fel-Pro 1094 S/B Chevy 265-350 Head Gasket
• (1) Small Block Chevy Intake Gasket Set

Features:

910-3782462 Chevy SBC Assembled Aluminum Camel Double Hump 461 Cylinder Head

• Visually similar to the 461 heads (GM # 3782461) which first appeared on the 1961 Corvette “fuelie”
• No accessory bolt holes, just like the original heads
• Aluminum heads shave 40 lbs. off the nose of your car vs. iron heads
• Improved port/chamber shape for better performance and efficiency
• Standard port location for use with most intake and exhaust manifolds
• Designed for 1962-86 small block engines (302/327/350)

325-2703 Edelbrock 2703 Performer EPS Chevy Intake Manifold

• Dual-plane manifold
• Runner design "tuned" for peak torque around 3500 rpm
• Power from off-idle to 5500 rpm
• Dyno gains of 5 hp and 9 ft/lbs of torque on 350 Chevy
• 3000 to 4500 rpm increased average 5+ ft/lbs
• Includes oil fill tube and push-in breather cap

572-1004 Finned 1960-86 Small Block Chevrolet Valve Covers

• Cast aluminum valve covers
• 'Finned' design along with the Chevrolet script logo
• Does not included oil fill or pcv holes

910-10207 Speedway Small Block Chevy Intake Gasket Set, 1205 Style

• 1205 style, 1.28" x 2.09" Stock/Small Race
• No end seals - use silicone gasket maker
• Heat crossover port is blocked

344-1094 Fel-Pro 1094 S/B Chevy 265-350 Head Gasket

• Superior heat dissipation
• Multi-layer steel gaskets
• Leakproof seal Perma Torque MLS
• 4.100" bore, .015" thick, 3.2 cc volume

910-17001 Speedway Small Block Chevy Steel Core Valve Cover Gaskets

• Stainless steel frame sandwiched between neoprene rubber
• Steel core improves seal
• Reusable
• .175" thick
• Fits 1960-86 small block Chevy style heads (4 perimeter bolts)

550-6080MRG Mr Gasket 6080MRG Super Intake Manifold Bolt Kit

• Grade 5 hex head bolts
• Black coated plated
• Hardened flat washers

The fully assembled heads are ready to run and are a great match to flat tappet camshafts. They're compatible with solid (mechanical) flat tappet or hydraulic flat tappet cams with up to .550” lift. The valve springs (single with flat wire inner damper) have a seat pressure of 120 lbs. Valves are +.100" long and must be used in conjunction with aftermarket aluminum roller rocker arms to clear valve springs used which are 1.46" diameter. The valve springs have 120 lbs. @ 1.800" installed height and 290 lbs. of open pressure at 1.20” (coil bind is at 1.160”). Pair with a vintage Duntov or 30-30 grind (or aftermarket equivalent) for a true nostalgic ‘60s experience.

325-2703 Instructions (PDF)

Gasket Cut Away Illustration (GIF)

Head Gasket Application (JPEG)

Speedy Tip for Proper Head Gasket Seal (GIF)  

Chevy SBC Assembled Aluminum Camel Double Hump 461 Cylinder Head

• 180cc intake port volume (factory 461 casting was 160cc)
• 62cc exhaust port volume
• 64cc fast-burn combustion chambers deliver big power gains vs. 461 castings
• 2.02” intake/1.60” exhaust valves (most  461 castings were 1.94/1.50)
• 3-angle valve job promotes better flow, especially at low-to-mid lifts
• Swirl polished & undercut stainless steel valves
• Intake flows 232 CFM @ .500” lift
• Exhaust flows 173 CFM @ .500” lift
• Accepts both perimeter and center bolt valve covers
• Single 1.46” diameter valve springs w/ inner damper
• Suitable for flat tappet camshafts up to .550” lift
• 7 degree lightweight chromoly retainers and keepers
• Hardened steel spring cups for durability
• High nickel valve seats provide optimum heat transfer and wear characteristics
• Manganese bronze valve guides reduce friction
• Viton positive valve seals are a modern upgrade from stock 461 castings
• 2-piece hardened steel pushrod guide plates for use with hardened pushrods
• 3/8” chromoly screw-in rocker arm studs included
• Blocked exhaust heat riser manifold crossover port
• 3/8” NPT coolant temperature probe port

325-2703 Edelbrock 2703 Performer EPS Chevy Intake Manifold

• Port exit dimensions: 1.15" x 1.87"
• Carb pad height: 4.27"

344-1094 Fel-Pro 1094 S/B Chevy 265-350 Head Gasket

• Embossed shim
• 4.100" gasket bore
• Nominal compression thickness: .015"
• Compressed volume: 3.2 cc
• Not for use with small block 400. Extra thin to increase compression.