|
#91013185
$241.99
/pair
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Chassis Header Tube Type, Oval Exhaust Port Shape, Raw
| MFG. Part # | 91013185 |
| Header Tube Type | Chassis |
| Exhaust Port Shape | Oval |
| Flange Style | Standard |
| Primary Tube Diameter | 1-5/8" |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyThese Small Block Chevy street stock headers are for 1972-1987 Malibu, Monte Carlo, Grand Prix, Cutlass and Regal. Also fits a 1970-1981 Camaro.
Charts
Header Dimension Chart (JPG)
For race/ off road use or for use on pre-1966 vehicles.
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 91013185 |
| Brand | Speedway Motors |
| Header Tube Type | Chassis |
| Exhaust Port Shape | Oval |
| Flange Style | Standard |
| Primary Tube Diameter | 1-5/8" |
| Material Type | Steel |
| Color | Natural |
| Weld-Up | No |
| Collector Diameter | 3 Inch |
| Finish | Raw |
| Hardware Included | Yes |
| Gasket(s) Included | Yes |
| Collector Reducers Included | No |
| Collector Attachment Type | Slip fit |
| GENERAL | |
| Sold in Quantity | Pair |
| Collector Length | 8.25" |
| Flange Thickness | .36" |
| Port Height | 1.66" |
| Port Width | 1.38" |
| Drivers Side Dimension A | 4.5" |
| Drivers Side Dimension B | 18.25" |
| Drivers Side Dimension C | 30" |
| Passenger Side Dimension A | 5" |
| Passenger Side Dimension B | 16.25" |
| Passenger Side Dimension C | 33.25" |
| Crossover Pipe Included | No |
| Gaskets Included | No |
| Transmission Mount Included | No |
| Cylinder Head Port Shape | Oval |
| Motor Mounts Included | No |
| Bolts Studs Included | No |
4.4
11 Reviews
Customers appreciate the product for its perfect fitment, solid construction, and affordability. It has delivered great performance, and some users even noted improved sound quality. Fitment issues were mentionned, but reviewers found solutions by making minor modifications. There were also concerns with specific parts like the spark plug socket. Nevertheless, customers generally found it superior to competitors and would recommend it. Its suitability for both stock and metric cars is a plus. Some caution is advised for potential need to modify aspects for a truly perfect fit.
4.4
11 reviews
5
7
4
2
3
1
2
1
1
0
Most Liked Positive Review
4.0
CLOSE FIT ALMOST WORKS WITH ALL STOCK CAR
YES I WAS ABLE TO MAKE THEM WORK. IF WE DID NOT RUN AFTER MARKET UPPER'S. THESE WOULD NOT WORK WITH STOCK FRAME IN STOCK LOCATION. THEY HIT THE LOWER CONTROL ARM EVER SO LITTLE. WAS ABLE TO MAKE A FEW CHANGES AND MAKE THEM WORK. YES THEY WILL WORK BUT BE READY TO MAKE A FEW CHANGES TO THE CAR
Most Liked Negative Review
2.0
not the best fitting
we need to run street type headers that fit inside the frame rails. The drivers side fit right in. Passenger side..... a real pain. I had to bend header and cut control arm mount to fit. a lot of work. AND can't get a socket on 1 spark plug. installation/removal of plugs must be done with a wrench. Also, had to spend $100 on header wrap and asbestos sleeves to keep the plug wires from burning off.
Filter by Ratings
I would buy this again
5.0
11 months ago
Brittany
Georgia
Verified
Product was as described and has great fitment.
Would Recommend
Excellent long lasting for short track racing
5.0
2 years ago
Justin
Pa
Verified
Gives the extra bit of HP needed.
Would Recommend
You can always count on speedway to have the parts you need
5.0
5 years ago
Philly66
Hillsboro, IN
Verified
Perfect fitment on 84 olds bomber car, so fitment and the cost was right on. I would definitley recommend.
Would Recommend
CLOSE FIT ALMOST WORKS WITH ALL STOCK CAR
4.0
6 years ago
TIM
OKLAHOMA
Verified
YES I WAS ABLE TO MAKE THEM WORK. IF WE DID NOT RUN AFTER MARKET UPPER'S. THESE WOULD NOT WORK WITH STOCK FRAME IN STOCK LOCATION. THEY HIT THE LOWER CONTROL ARM EVER SO LITTLE. WAS ABLE TO MAKE A FEW CHANGES AND MAKE THEM WORK. YES THEY WILL WORK BUT BE READY TO MAKE A FEW CHANGES TO THE CAR
Would Recommend
Good for the price.
5.0
7 years ago
Tony the bullet
Independence ks
Verified
Priced well for.the product
Would Recommend
I would buy agine
5.0
8 years ago
Duffie
Forest City NC
Verified
They work great
Would Recommend
Solid construction
3.0
9 years ago
Dave Daniels
Dugger,In
Verified
Had to ding header tubes on driver side for oil pan and lower a arm clearance. Also had to torch off back of lower a arm mount for clearance
Great replacement headers
5.0
10 years ago
Tornado Tim
Locke, New York
Verified
Used to replace cracked headers on stock car. Fits without any modifications to engine compartment. Very pleased with price.
Would Recommend
Fit great
5.0
10 years ago
111
Indiana
Verified
Look good, sound good. Easy installation
Would Recommend
not the best fitting
2.0
11 years ago
dan surra
kersey, pa
Verified
we need to run street type headers that fit inside the frame rails. The drivers side fit right in. Passenger side..... a real pain. I had to bend header and cut control arm mount to fit. a lot of work. AND can't get a socket on 1 spark plug. installation/removal of plugs must be done with a wrench. Also, had to spend $100 on header wrap and asbestos sleeves to keep the plug wires from burning off.
Showing 10 of 11 reviews
7 Questions • 7 Answers
How do these headers compare to the schoenfeld 185 header?
by Josh
• 2 years ago
1 answer
View Answer
Will these fit a 1978 z/28 with a stock 350?if not what do you have for the same price?also looking for exhaust for the same.thank you.
by Angrydave
• 9 years ago
1 answer
View Answer
We have a 81 chevy c20 4x4 with the 350 engine will these headers work
by Allen
• 10 years ago
1 answer
View Answer
I have a 78 elco with a sbc 400 with a 700r trans the heads are victor jr angled plugs do you think these will work
by Jason the newbie
• 10 years ago
1 answer
View Answer
set back on motor???? my street stock division, its legal to set back motor as far as #1 spark plug to upper ball joint. so question is, will it create a problem having this set back?its an 81 z-28 front clip camaro....
by Theshoe
• 13 years ago
1 answer
View Answer
Can you tell me how much these will stick out from the head? (Measure from the inside of the flange to the furthest out tube.) Also can you measure from the top down to the lowest part on the collector?
by usafracer
• 15 years ago
1 answer
View Answer
will these fit a 73 c10? If so who has used these headers and are they a good product?
by Nichols
• 15 years ago
1 answer
View Answer
7 of 7 questions shown
