Speedway Motors 2-Inch, Black, 5-Point Latch & Link Belts

• Compatible with HANS and other Head and Neck Restraint devices
• Harness is adjustable on both sides with anti-slip spring
• Made with high quality nylon webbing materials double stitched for extra strength in all critical areas
• Individual 55-inch-long 2-inch-wide shoulder harness belts with pull-down adjustments
• Features deluxe 2-inch-wide lap belt with pull down adjustments
• Includes 2-inch-wide single anti-submarine belt
• Traditional latch-and-link buckle is easy to use and includes easy to find red pull tab
• SFI 16.1 certified with date coded certification tags on shoulder, lap, and sub belts
• All belts can be mounted as bolt-in or wrap around, 2-inch bolt-in tabs included
• All belts meet or surpass IMCA, USAC, NASCAR, SCCA, and other racing specifications
• Available in black

A Traditional 5-Point Harness with The Features Racers Want

We know racing is your passion, it is ours too. However, we also know all too well that racing is not easy on the wallet. Far too often, by the time the racing budget is used on the major bits like driveline, tires, and so forth, there is not much left in the piggy bank for safety equipment like helmets, fire suits, and racing belts. We believe these items are just as critical to winning a race as having that new race-spec carb or a fresh set of tires, which is why we continually add to our Speedway Motors line of safety gear so that you have a budget-friendly option for staying safe on the track.

Built to Handle the Stresses of Any Racing Venue

Our Speedway Motors 5-point harness is just what you need for proper retention in your race car. Crafted from premium nylon webbing and double stitched in all critical areas, our racing seat belts are a great value while providing SFI 16.1 certification (dated labels sewn into shoulder, lap, and sub straps) so that you will pass inspection without issue. Built as a pull-down configuration where the strap ends are pulled down, or away, from the adjusters, makes belt adjustment quick and easy for the driver.

The racing harness uses 2-inch-wide lap and shoulder belts while the single anti-submarine strap is 2 inches wide as well. The shoulder harnesses are a generous 55 inches in length, providing plenty of material to reach your harness crossbar or other approved mounting position. A standard latch-and-link design clasp makes securing harness ends easy while the quick-release pull tab makes belt release a one-handed operation for the driver or emergency personnel.

Your Choice of Bolt-in or Wrap Around Installation Included

We made our 5-point harness easy to install in your race car too. The racing harness can be installed as either a wrap around or bolt-in configuration and we even provide the bolt-in harness tabs with the harness! So now you can easily configure your new Speedway Motors 5-point racing harness and install it easily no matter the mounting type at the seat/floor and cage/harness bar locations. The included 2-inch mounting tabs for bolt-in use make installation quick and easy, or remove the tabs and use a wrap around configuration. Alternatively, you can convert your 5-point racing harness to a clip-in racing harness using our clip-in harness conversion kit if you prefer quick, easy removal of your racing belts.

Harnesses are available in black with a high visibility red pull tab attached to the latch-and-link clasp. To prevent installation hassle and delays we offer our seat belt installation kit to aid in your 5-point harness install if you are planning a bolt-in installation. Each kit will attach one section of the harness (lap, shoulder, or sub), so order three kits if you are bolting in all five points of your harness. Our optional sternum protector is a highly recommended addition that holds your shoulder harnesses together in the advent of an impact.