Speedway Modified Radiator & Fan Shroud Kit, 26 Inch, Single Pass

Your search for your Chevelle or Impala stub Modified's cooling components just became a breeze! We threw all of the basics that you will need for a single pass setup with a mechanical fan into one simple kit. All you'll need to do fill up the radiator then hit the track!

Features

This kit includes:

Speedway SBC Universal Aluminum Radiator

Speedway’s line of universal Chevy radiators makes it easy for budget-minded racers to get a professional-quality aluminum racing radiator. These high-performance radiators feature furnace-brazed construction, two rows of large 1" aluminum tubes, billet filler necks and a maximum number of fins per inch for great heat transfer. They are not available with transmission coolers and they do not come with mounting brackets.

Driver’s side upper inlets and passenger side lower outlets

All-aluminum, furnace-brazed construction

No cheap epoxy glue or crimped in gaskets

Maximum amount of fins per inch allows greater heat transfer

Billet filler necks

26" width

Aluminum Fan Shroud Kit for engine-driven fan

The adjustable collar will accommodate 15"-20" fan diameters.

Measures 19-5/8" tall x 20-1/2" wide x 2-5/8" deep.

Allows the installer the choice of off-center, side-to-side and above the radiator fan positioning

Includes fully-formed shroud of .063" lightweight aircraft aluminum

3" trimmable collar

Includes all the necessary hardware and mounting instructions

SBC Aluminum 15° Swivel Water Neck, Black

Includes 2 stainless steel bolts and o-ring gasket.

Water Outlet Restrictor Kit

Three aluminum water outlet restrictor plates with 5/8", 3/4" and 1" diameter holes.

Gates 25480 Vulco-Flex II Flexible Radiator Hose, 1-1/2" x 20"

Gates 26502 Vulco-Flex Green Stripe Radiator Hose, 1-3/4" x 16-1/2"

Internal spiral wire bonded to the I.D. of the hose, which prevents collapsing and kinking while positively retaining the spring.

Designed to replace straight or curved coolant hoses, bends in almost any direction

Excellent flexibility, yet collapse and kink resistant

Heat resistant construction throughout

(2) COMP Cams G31240 Gator Brand Hose Clamps, 1.625-2.375" Range

(2) COMP Cams G31232 Gator Brand Hose Clamps, 1.250-2" Range

Edges of the band are rolled to prevent any sharp edges from damaging the hose

Constructed of continuous stainless steel band with extruded, asymmetrical threads

Asymmetrical (offset) gear box employed to reduce clamp twist when tightening

Combination of asymmetrical gear box and extruded threads provides even clamping force over surface of hose

Hold up under 3.7 ft./lbs. (5nm) torque

High-Pressure Radiator Cap, 20lbs

Fan Shroud Installation Instructions (PDF)