|
#91034344
Speedway Chrome Mustang II Manual Steering Rack & Pinion
- This new manual rack and pinion assembly is built with all new parts to ensure long life
- Beautiful chrome plating makes this perfect for show cars
- Fits all stock and aftermarket Mustang II crossmembers with 16" mount centers
$247.99
/each
On Backorder
This part is Backordered. We currently do not have an estimate when this item will ship.
Get something sooner
Browse In Stock and Ready to Ship AlternativesQuantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Product Summary
Universal Fit, Manual Rack Type, 45" Overall Length
- This new manual rack and pinion assembly is built with all new parts to ensure long life
- Beautiful chrome plating makes this perfect for show cars
- Fits all stock and aftermarket Mustang II crossmembers with 16" mount centers
- 4.25 turns lock to lock for a driver friendly steering ratio without excessive force
- Input shaft is 9/16"-26 spline to connect a U joint or steering shaft coupler
Need To Know
Need help?
855.313.9176Quick and Easy Returns
Return PolicySpeedway Motors 91034344 Details
Speedway Motors 91034344 Details
New manual rack and pinion steering assembly for Pinto/Bobcat/Mustang II based front suspensions in street rods and kit cars. Has a 9/16" 26-spline input shaft. 16" mount centers.
Fits aftermarket Mustang II crossmembers.
Specs
- Mount Centers: 16"
- 3.5 turns lock-to-lock
- Rack Travel: 5.25"
- Overall Length: 45"
- Inner Tie Rod Pivot Point Center-to-Center: 24-1/2"
- Input Shaft Spline: 9/16" 26-spline
Speedway Motors 91034344 Specifications
Speedway Motors 91034344 Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | 91034344 |
| Brand | Speedway Motors |
| Rack Type | Manual |
| Finish | Chrome |
| GENERAL | |
| Overall Length | 45" |
| Center to Center | 24.5" |
| Turns Lock to Lock | 4.25 |
| Travel | 5.25" |
| Sold in Quantity | Each |
Ratings & Reviews
4.8
6 Reviews
Customers have praised the quality and practicality of our product. They specifically highlighted the bright chrome quality, easy installation, and fit. Many plan to purchase the item again, suggesting high satisfaction with performance. The product has proven effective in varied car models, including a '47 Plymouth, a '31 Ford, and a cobra kit car. A point of differentiation from competitors noted by a customer was that our unit indeed comes with inner tie rod ends. However, it is indicated that jam nuts are not included in the package. Note: some customers have advised buying mounting bolts and bushings simultaneously to save on extra costs.
Ratings & Reviews
4.8
6 Reviews
Customers have praised the quality and practicality of our product. They specifically highlighted the bright chrome quality, easy installation, and fit. Many plan to purchase the item again, suggesting high satisfaction with performance. The product has proven effective in varied car models, including a '47 Plymouth, a '31 Ford, and a cobra kit car. A point of differentiation from competitors noted by a customer was that our unit indeed comes with inner tie rod ends. However, it is indicated that jam nuts are not included in the package. Note: some customers have advised buying mounting bolts and bushings simultaneously to save on extra costs.
4.8
6 reviews
5
5
4
1
3
0
2
0
1
0
Filter by Ratings
Top quality
5.0
7 years ago
Cheesewizz
Florida
Good quality, the chrome is bright . Make sure you buy the mounting bolts and bushings at the same time to save on shipping
Would Recommend
I'm going to buy this again
5.0
7 years ago
Ace
Texas
Verified
Worked perfectly under my 47 Plymouth.
Would Recommend
Outstanding product and service
5.0
9 years ago
MGBRingo
Big Lake, MN
Verified
I ordered this rack Tuesday morning and it was delivered Wednesday to Mpls. I couldn't believe it and the shipping was the 'slower' free shipping. It is a very nice product. It fits great with easy install. I assumed it included the jam nuts like the non chrome one does but they were not included. I don't have them on my old rack so I will have to find some. But here it is two days after I ordered it and I have it installed and driving down the road. And this is not an isolated good service from Speedway. They provide excellent service on every order.
Would Recommend
Great product
5.0
10 years ago
Big D
Round rock tx
Verified
Worked great on my 31 ford. Made some 1/4 in plate mounts to mount the rack.
Would Recommend
Great product and even better customer service.
5.0
11 years ago
MG
South Carolina
Verified
I needed a replacement manual rack & pinion for my Cobra kit car due to inner tie rod end failure. During the course of my research in trying to locate the right replacement unit, I discovered that while other vendors show pictures of the rack with the inner tie rod ends, they do not come with the unit. Naturally I called Speedway to verify that their unit did indeed come as pictured. The technical support rep went over what I was looking for to verify that it would solve my problem and I had the unit in 2 days. I couldn't have asked for better service and / or support during the process.
Would Recommend
Count on Speedy to deliver great value
4.0
15 years ago
Grandsport51
FLORIDA
Verified
We installed in 664 HP 460 powered cobra kit car replacing blown used rack Owner comments it feels like power steering
Would Recommend
Showing 6 of 6 reviews
Questions & Answers
Questions & Answers
9 Questions • 10 Answers
What is the ratio and the length of the input shaft, both are very important details
by Jerry
• 7 years ago
2 answers
View Answers
On you rack and pinion 91034344 you said that the rod ends are 9/16-18 threads, Both Right hand or one Right and one Left?
by Preston
• 7 years ago
1 answer
View Answer
Hello, On your rack and pinion number 91034344 what are the thread size on the ends? The 91034345 is answered as M14 x 1.5 We are looking to use this on a custom build of a tribute to the Bugatti Type 23 Tank. Thanks Preston
by Preston
• 7 years ago
1 answer
View Answer
Will this rack and pinion fit on my 63 Chevy II subframe I bought the aftermarket subframe from Speedway
by Ed
• 7 years ago
1 answer
View Answer
hello, I bought this rack & pinion MFG. Part #: 91034344 what mount bushings and bolt kit do I need to complete my install?
by man called nova
• 7 years ago
1 answer
View Answer
Will this product fit my 1953 GMC straight axel setup with some modifications being made? Not sure the length that I need for my truck. Thanks in advance.
by Shane
• 8 years ago
1 answer
View Answer
The sugested part for my application is #91034344 Mustang ll rack and pinion on 39 chev. This would be mounted to the back of an axel and require a slip joint with travel of 2" or more for axel movement as springs compress. This type of rack is what i wanted for 35 years. I have never seen this set up. Everyone i know who could fit and install this says there is no slip joint that moves that far. Does anyone sell a slip joint like this and where could i find one? Thank You
by steve
• 8 years ago
1 answer
View Answer
To adjust Toe-In after this unit is installed on the car, do I have to remove the outer tie rod from the spindle to rotate them? Or does the inner shaft (the threaded male shaft that goes into the rack & pinion unit) rotate? Normally the inner shaft has a place for a wrench so that it can be rotated for alignment.
by Barnes Garage
• 9 years ago
1 answer
View Answer
Will rack extensions # 91034345 fit rack # 91034344?
by whitty
• 12 years ago
1 answer
View Answer
9 of 9 questions shown