|
#91605069
Speedway 52-1/2 Inch 1310-Series Drive Shaft & U-Joints Kit
- Complete your driveline with our 52.5" drive shaft and U-joint kit
- This kit includes a Speedway 52.5" Center to Center Drive Shaft and two 1310 Series Chevy to Chevy U-Joints
- The driveshaft is forged from durable lightweight steel with a 2.5" outside diameter that fits most Hobby Stocks, Factory Stocks, and Stock Cars
$183.99
/kit
In Stock
$186.97
Save $2.98
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Product Summary
2.50" Overall Diameter, 52.5" Overall Length, Steel
- Complete your driveline with our 52.5" drive shaft and U-joint kit
- This kit includes a Speedway 52.5" Center to Center Drive Shaft and two 1310 Series Chevy to Chevy U-Joints
- The driveshaft is forged from durable lightweight steel with a 2.5" outside diameter that fits most Hobby Stocks, Factory Stocks, and Stock Cars
- Our U-Joints are high quality, heat treated steel forged replacements that measure 1-1/16" x 3-7/32" x 1-1/16" x 3-7/32" with outside retaining clips
- Driveshafts are not dynamically balanced, we recommend dynamically balancing the driveshaft prior to installation
Comes as a Kit
View Kit Components
Key Specs
| Overall Diameter | 2.50" |
| Overall Length | 52.5" |
| Material Type | Steel |
| Balanced | No |
| Transmission Yoke Included | No |
Need To Know
Need help?
855.313.9176Quick and Easy Returns
Return PolicySpeedway Motors 91605069 Details
Speedway Motors 91605069 Details
Kit Includes:
(2) Speedway 1310 Series Chevy to Chevy U-Joint
(1) Speedway 1310-Series Steel Drive Shaft
Speedway 1310 Series Chevy to Chevy U-Joint
High quality, heat treated forged steel replacement U-joints. Comes with outside retaining clips and can be greased.
- Yoke U-Joint Series: 1310
- Yoke Width: 3-7/32"
- MFG. Part #: 91048315
- Cap Diameter A: 1.062"
- Cap Diameter B: 1.062"
- Width A: 3.219"
- Width B: 3.219"
Speedway 1310-Series Steel Drive Shaft
Lightweight steel driveshaft lengths measured from center of U-joint to center of U-joint. Drive shafts are not dynamically balanced. We recommend dynamically balancing the driveshaft prior to installation.
- Overall Length: 52.50"
- Tube O.D.: 2.50"
- Weight: 12.20 lbs.
- Material Type: Steel
- Finish: Painted
- Color: White
- Yoke U-Joint Series: 1310
Speedway Motors 91605069 Specifications
Speedway Motors 91605069 Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | 91605069 |
| Brand | Speedway Motors |
| Overall Diameter | 2.50" |
| Overall Length | 52.5" |
| Material Type | Steel |
| Balanced | No |
| Transmission Yoke Included | No |
| Transmission Joint Style | 1310 U-joint |
| Differential Joint Style | 1310 U-joint |
| GENERAL | |
| Yoke U-Joint Series | 1310 |
| Shaft Length | 52.50" |
| Sold in Quantity | Kit |
| Position | Rear |
Ratings & Reviews
4.3
16 Reviews
Customers generally praised the driveshaft for its great fit, usability, and good value. Users have successfully installed it on various car models such as 49 Ford F1, 55 Chevy, and 67 Camaro, emphasizing its versatility. Despite the unexpected white color, the driveshaft's aesthetics were generally admired. However, there were mixed reviews on its balance and u-joint quality. Critics noted a need to replace the u-joints for more stable usage while others found it nearly balanced out of the box, eliminating the need for adjustments. Overall, customers appreciated the driveshaft's quality and practicality.
Ratings & Reviews
4.3
16 Reviews
Customers generally praised the driveshaft for its great fit, usability, and good value. Users have successfully installed it on various car models such as 49 Ford F1, 55 Chevy, and 67 Camaro, emphasizing its versatility. Despite the unexpected white color, the driveshaft's aesthetics were generally admired. However, there were mixed reviews on its balance and u-joint quality. Critics noted a need to replace the u-joints for more stable usage while others found it nearly balanced out of the box, eliminating the need for adjustments. Overall, customers appreciated the driveshaft's quality and practicality.
4.2
16 reviews
5
10
4
4
3
0
2
0
1
2
Most Liked Positive Review
5.0
I would buy this again
TH350 tranny to 10 bolt rearend needed a straight shaft and the shipped shaft was straight as an arrow, didn't even need to put any balancing weights, shaft spins smooth. The all white paint job was different, but I ran a 2" candy stripe in black paint and I think it looks pretty cool like a worm drive.
Most Liked Negative Review
1.0
I would not buy these again
Installed in my 68 firebird with Trimic 5 speed, I hade it shortened and balanced I had a bad vibration @ 45 mph so I took it back to the shop that did the work, They told me it was do the cheep u joints that I got with the kit, so we replaced the front one with a Spicer u joint the rear seamed ok, NOT 300 miles later had another vibration now @ 70mph and up, Shure enough the rear one was sloppy as well now I will be installing another Spicer, The shaft is ok but I got the shaft on the rest.
Filter by Ratings
Driveshaft was short
1.0
5 months ago
Hope it works
Booneville Ms
Verified
Was supposed to be 53 1/2
I would buy this this again
4.0
a year ago
Billy E
Iowa
Verified
Worked out nice, just didn't care for white paint. Haven't had a chance to get a lot of miles but test drove a couple times and no vibration at all without any balancing
Would Recommend
Yes
4.0
a year ago
JBS
Arkansas
Verified
As described
Yes, I would buy the driveshaft again.
4.0
a year ago
Cartune
Pennsylvania
Verified
Driveshaft seems fine, however the universals supplied with it are not usable. they are oversized slightly and don't fit in the driveshaft or yoke without FORCING. I ended up replacing them with proper Delco universals and they fit the yoke and driveshaft very well.
Would Recommend
I would buy this item again
5.0
a year ago
Mico
Tucson Az
Verified
Good quality drive shaft and reasonably priced
Would Recommend
I would buy this again
5.0
2 years ago
Marco
Bethel Island, Ca.
Verified
TH350 tranny to 10 bolt rearend needed a straight shaft and the shipped shaft was straight as an arrow, didn't even need to put any balancing weights, shaft spins smooth. The all white paint job was different, but I ran a 2" candy stripe in black paint and I think it looks pretty cool like a worm drive.
Would Recommend
I have been purchasing Speedway parts for 30 sum years !
5.0
2 years ago
C&C auto restorations
Spokane Wa.
Verified
My "go to " parts house with great prices on quality parts. I`ve been pleased with all my purchases over the years !
Would Recommend
This Product Worked Great!
5.0
2 years ago
Jack B
Gastonia NC
Verified
Product worked great, installed easily. It Operated as designed on my Thunder Bomber Dirt Track Car. It was installed between a Saginaw 3 Speed and a 9 Inch Ford Rear end that is on an 87 Monte Carlo Chassis. I would recommend this product!
Would Recommend
Good price nice driveshaft painted white WTF
5.0
2 years ago
Me
Florida
Verified
Paint these black nobody uses white driveshafts!
Would Not Recommend
Great Driveshaft
5.0
3 years ago
Mountainman924
Sequatchie, TN
Verified
This fit my 49 Ford F1 perfectly. I have a 350 Chevy with a 700 R4 Trans and everything fit perfect even the rear U-Joint into a 49 Ford rear end. Great price.
Would Recommend
Showing 10 of 16 reviews
Questions & Answers
Questions & Answers
1 Question • 1 Answer
Why is this driveshaft not " balanced" when it is manufactured?
by Richard
• 4 years ago
1 answer
View Answer
1 of 1 questions shown