|
#91032994
Speedway 1957 Chevy Tilt Steering Column, Plain Finish
- 2-inch dia. column with 5 position tilt provides easy entry/exit and custom driving position
- Built-in self-cancelling GM turn signal switch with on-column activated hazard flashers
- GM 3-7/8-inch column wiring plug is compatible with OE (with adapter) and aftermarket chassis harnesses
$280.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Product Summary
1957 Chevy, Direct Mount Type, Tilt Column Type, Steel
- 2-inch dia. column with 5 position tilt provides easy entry/exit and custom driving position
- Built-in self-cancelling GM turn signal switch with on-column activated hazard flashers
- GM 3-7/8-inch column wiring plug is compatible with OE (with adapter) and aftermarket chassis harnesses
- Floor shift style column works with any floor shifted automatic or manual transmission
- Direct fit plain steel finish column uses factory upper mounting bracket
Key Specs
| MFG. Part # | 91032994 |
| Mount Type | Direct |
| Column Type | Tilt |
| Shifter Location | Floor |
| Key Location | Dash |
Need To Know
Need help?
855.313.9176Quick and Easy Returns
Return PolicySpeedway Motors 91032994 Details
Speedway Motors 91032994 Details
- 2-inch OD column housing,works with factory upper mount
- Overall length from end of bell to tip of steering shaft is 34.5-inches
- Five position tilt mechanism with 30 degrees of total adjustment
- Integrated GM style self-canceling turn signal switch with 4-way hazards
- GM style 10-pin 3-7/8-inch wiring plug connects directly with optional adapter
- Aftermarket true 1-inch DD output shaft uses commonly available aftermarket U-joints or rag joints
- Accepts any 1969 to 1994 GM steering wheel or GM steering wheel adapter
- Plain steel finish is ready to prime and paint to match your interior
- Includes chrome plated turn signal lever, tilt lever, and hazard knob
Enjoy the Drive Once Again
In the 1950s a tilt steering wheel was a scarce reality saved for luxury cars and exotics. If you did not fit well between the steering wheel and the seat tough cookies! It does not have to be that way today for your '57 Chevy. Get behind the wheel and drive again in comfort with a Speedway Motors '57 Chevy Tilt Steering Column.
A Premium Tilt Column with All the Features You Want
Old tilt columns are just that-old! Do not waste your time in a salvage yard digging around for a steering column for your project that will undoubtably need a complete rebuild. Not to mention it most likely will be too long or too short for your application.
Using one of our '57 Chevy tilt steering columns is the way to go. This is not just any old aftermarket steering column either. Manufactured with all new parts in a compact design, the small 2-inch diameter steering column tube and compact tilt head that is just 7-inches in length provides copious amounts of leg room while fitting nicely within the dash.
The five-position tilt head allows 30 degrees of tilt, 20 degrees up and 10 degrees down from straight. This tilt function not only provides the perfect angle for personal driving comfort but can facilitate easier ingress/egress with a simple flick of the tilt lever.
Our '57 Chevy tilt steering columns are modeled after the GM 1969-1994 specifications for steering wheel spline, turn signal wiring, and more. An industry standard. We use a 1-inch double-D (DD) steering shaft for connecting to your stock steering box. A 1-inch DD to 3/4-inch DD coupler is required when retaining the stock steering box and the steering box input shaft requires cutting and modification to a ¾-inch DD configuration. For aftermarket steering boxes or rack-and-pinion conversions we offer a multitude of U-joints and steering shaft components to facilitate connecting your new column. We also offer this column in a column shift version.
Direct Replacement for Your '57 Fixed Column
Our '57 Chevy Tilt Steering Column arrives in a plain steel finish ready to be painted to your specific interior color scheme and ships with cleanly styled chrome-plated control levers for the turn signal switch, tilt mechanism, and hazard light switch. If you prefer, we offer our column in a chrome version as well. The 2-inch OD column tube allows it to be easily secured to your dash using the original upper mount. We recommend one of the lower mounts listed below to aid in your installation.
The standard GM steering wheel spline means any 1969-1994 GM steering wheel is a direct fit, or you can purchase a steering wheel adapter to aid in fitting your 3-, 5-, or 9-bolt wheel to your new column. Our steering wheel adapter buyer's guide will help you find the proper fit.
Our '57 Tilt Steering Column uses GM steering column wiring connectors. The standard 3-7/8-inch turn signal switch connector even uses stock GM wire color codes. This makes our column a direct plug-and-play electrical connection to any vehicle that has been upgraded with an aftermarket wiring harness. For '57 Chevy vehicles with factory wiring, you can easily adapt your turn signal wiring by installing the year specific jumper harness listed below, which will also give your Chevy easily accessed column activated hazard lights.
If the original fixed steering column is preventing you from enjoying your '57 Chevy, then upgrade to our '57 Chevy Tilt Steering Column today and drive your vehicle in comfort. Your knees will thank you for it!
Specs
Black-ground for horn
Gray-Left front turn
Blue-right front turn
Brown-power feed from hazard flasher
Purple-power feed from turn flasher
Yellow-Left rear turn
Green-Right rear turn
White-Power feed from brake light switch
Speedway Motors 91032994 Specifications
Speedway Motors 91032994 Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | 91032994 |
| Brand | Speedway Motors |
| Mount Type | Direct |
| Column Type | Tilt |
| Shifter Location | Floor |
| Key Location | Dash |
| Overall Length | 34.5" |
| Finish | Natural |
| Output Shaft Type | 1" DD Aftermarket |
| Tube O.D. | 2" |
| Material Type | Steel |
| Collapsible | No |
| Spline Count | DD |
| GENERAL | |
| Sold in Quantity | Each |
| Notes | 7" from steering wheel mounting point to 2" tube. Wires exit 8.375" below bell shaped housing. |
| Gear Indicator Included | No |
| Hazard Switch | Yes |
| Telescoping | No |
| Tilt Column | Yes |
| Turn Signal Switch Included | Yes |
Ratings & Reviews
4.5
4 Reviews
Customers laud the product for its high quality and practicality, with many praising its direct fit to a '57 model and factory bracket compatibility. It features all necessary levers and an emergency flasher button, notable attributes contributing to its users' satisfaction. Some buyers had to cut off a bit to fit pre-drilled holes, but overall, it seems to align well. Even though the inclusive Grant steering wheel made the complete setup slightly longer, it didn't detract from the product's overall usability. The product stands out for its ability to meet specific needs and cost-effectiveness, with customers often expressing surprise at the value they get for their money.
Ratings & Reviews
4.5
4 Reviews
Customers laud the product for its high quality and practicality, with many praising its direct fit to a '57 model and factory bracket compatibility. It features all necessary levers and an emergency flasher button, notable attributes contributing to its users' satisfaction. Some buyers had to cut off a bit to fit pre-drilled holes, but overall, it seems to align well. Even though the inclusive Grant steering wheel made the complete setup slightly longer, it didn't detract from the product's overall usability. The product stands out for its ability to meet specific needs and cost-effectiveness, with customers often expressing surprise at the value they get for their money.
4.5
4 reviews
5
2
4
2
3
0
2
0
1
0
Filter by Ratings
I would buy it again.
4.0
a year ago
Ron
Oregon
Verified
The finish and quality is great. I did end up shortening the shaft about 2" where it connects to the rag joint. Having the tilt, it feels like it was too close, especially if you have a steering wheel with any amount of dish to it.
Would Recommend
If the time came I would reorder the column
5.0
a year ago
Pap
Holly Springs NC
Verified
It's exactly what I was looking for. Fit well.
Would Recommend
Good bang for the buck
4.0
5 years ago
Matt
Rindge NH
Verified
Has the mounting holes for the factory bracket. This is a direct fit for a 57,for the money great product. I was surprised to see the hole for the lower cast factory cover
Would Recommend
tilt column for 57 chevy
5.0
8 years ago
Pablo
St Augustine
Verified
column came unpainted as requested, with all levers and emergency flasher button, had to cut 1" off 1" dd to put column where it needed to be with the pre-drilled holes for the support bracket. Grant steering wheel bolted on correctly to allow for horn, though it did make everything longer (closer to chest)
Would Recommend
Showing 4 of 4 reviews
Questions & Answers
Questions & Answers
2 Questions • 2 Answers
I had planned to use a repo 59 impala steering wheel with this collumn in my 57 chev. What horn assy would I need. Do I need any adaptors for the steering wheel?
by Dave
• 7 years ago
1 answer
View Answer
What is the outside diameter of the tube. I need an 1 1/2" to fit my 1965 corvette Thank you, Tim
by tim
• 11 years ago
1 answer
View Answer
2 of 2 questions shown
Fitment
Fitment
1957 Chevy Bel Air
1957 Chevy Del Ray
1957 Chevy Nomad
1957 Chevy One-Fifty Series
1957 Chevy Sedan Delivery
1957 Chevy Two-Ten Series

