|
#91664059
$322.99
/kit
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Frame Position, Disc/Drum Brake System Type
| MFG. Part # | 91664059 |
| Brand | Speedway Motors |
| Brake System Type | Disc/Drum |
| Reservoir Type | Integral |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyThis pedal unit will work with your automatic transmission only. Bolts right up under the frame and gives you the stopping power you need for your early model chevy car. Get more power today by installing the 7" dual power brake booster assembly for your 1949-1954 Chevy Full Size Car.
Chevy 1949-54 Pedal Assembly
**This is for disc/drum and drum/drum application. If you are running a different application, please let us know.
** When installing unit under the floor and not on the firewall 10LB or 2LB residual valves will be needed for correct install.
Charts
Booster Tech Tip (GIF)
Guides & Documents
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 91664059 |
| Brand | Speedway Motors |
| Brake System Type | Disc/Drum |
| Reservoir Type | Integral |
| GENERAL | |
| Position | Frame |
| Master Cylinder Mount Type | Reverse |
| Pedals Included | Brake |
| Master Cylinder Count | 1 |
| Outlet Count | Tandem |
| Outlet Fitting | 1/2"-20 IFF |
| Outlet Fitting 2 | 9/16"-18 IFF |
| Master Cylinder Material | Cast Iron |
| Finish | Powder Coated |
| Brake Booster Included | Yes |
| Balance Bar | No |
| Sold in Quantity | Kit |
| Brake Booster Type | Vacuum Diaphragm Dual |
| Brake Booster Diameter | 7 Inch |
4.5
6 Reviews
Customers generally find the product to be high-quality and practical, but some modifications may be required for fitting in certain car models. Despite this, customers find the product useful and substantial for their needs. The product has comparisons favorable to competitors in terms of usability and material quality. However, there have been some suggestions about coupling this product with a remote reservoir master cylinder for improved convenience. Many consumers have shown willingness to purchase the product again, indicative of overall customer satisfaction.
4.5
6 reviews
5
4
4
1
3
1
2
0
1
0
Filter by Ratings
Almost perfect
4.0
3 years ago
Josh
Nj
Verified
Perfect and amazing product. although yo make it fit in my car I had to cut holes in the base to make way for the rivets, it still has be happy and proud to have this product in my 53.
Would Recommend
Well engineered
5.0
5 years ago
Lou
Warwick NY
I purchased this knowing I needed to make room for the booster under the Floorplan. A few blows with a hammer and I was able to reshape the Floorplan in that area and it fit perfectly. The only thing that may affect some is that the brake pedal lever that runs under the floor board was offset and didn't align with the actual brake pedal coming through floor board. I had to heat it up and realign it to work. I'd recommend swapping out the master cylinder to a remote reservoir one because the master cylinder falls under a floor pan reinforcement. To me it just makes life easier than having to create an access hole to check and fill master.
Would Recommend
made to fit my 51 chevy
5.0
5 years ago
jack
erwin tn
Verified
save hours of fab work
Would Recommend
Yes
5.0
5 years ago
Jason
Leesburg ga
Verified
Pros looks and feels original. The end position is slightly left of the original brake location coming through the floor. Cons. Slight floor modifications are needed to the rear of the floor pan due to the power booster being slightly to big. I cut my floor and added a jump to it so everything clears.
Would Recommend
This product is OK
3.0
6 years ago
Luke
Davenport,. IA
Verified
Had my master cylinder on the firewall and had to move it back under the floorboard because of a turbo installation. If it would have a set of instruction on how to locate this setup the fab work wouldn't be so bad. Going to have to make a bubble in the floorboard under drives seat to get the booster to fit. That being said it still a good product.
Would Recommend
I would buy again.
5.0
6 years ago
Jr
San jose
Verified
Good product, but custom mounting is needed for a custom application. Do not know how it would work in a factory application.
Would Recommend
Showing 6 of 6 reviews
2 Questions • 2 Answers
what is the bore size of the master cylinder in this kit?
by Timothy
• 3 years ago
1 answer
View Answer
When installing this do I put the front brakes to the back brake line spot on the master cylinder (towards rear of car) and rear brakes in the front spot (closet to firewall)?
by Mark
• 7 years ago
1 answer
View Answer
2 of 2 questions shown
1950-1954 Chevy Bel Air
1949-1952 Chevy Fleetline
1953-1954 Chevy One-Fifty Series
1949-1952 Chevy Styleline Deluxe
1949-1952 Chevy Styleline Special
1953-1954 Chevy Two-Ten Series
